Cambridge Audio ID10 user manual Dock adaptors, Connecting your iD10, Using your iD10

Page 5

Dock adaptors

The iD10 comes with 3 types of docking adaptors. Insert the dock adaptor that fits your iPod model, then plug in your iPod.

iPod models supported

iPod Nano (2GB/4GB and 8GB)

iPod (20GB/40GB and U2 Special Edition )

iPod with colour display (40GB/60GB and 80GB)

Note: The docking station does not support iPod Shuffle.

Connecting your iD10

1Audio output

Connect your docking station to your amplifier/stereo system (3.5mm to Dual Phono - not included).

212V DC input

Connect your docking station to the supplied AC adapter.

3Docking adaptor

Fit the correct docking adaptor for your type of iPod.

Using your iD10

1.Plug your iPod into the docking station.

2.Turn on your amplifier/stereo, selecting the correct input.

3.Press Play on iPod/remote control.

1

2

Audio In

12V DC IN

*AV Cable not included

Note: The iD10 is also compatible with Cambridge Audio Azur Navigator remote controls supplied with our products which support 'iPod Control' (currently this is almost any remote in our Azur range).

Image 5
Contents ID10 Approvals Safety precautionsChecking the Power Supply Rating Important safety instructions Docking station UK power supply Docking adaptors ContentsDock adaptors Connecting your iD10Using your iD10 Remote control ID10 Accessory Pack Not included, sold separatelySpecifications TroubleshootingLimited warranty