General options, Audio, Other settings

General options

Press the Menu button to access the following options:

Audio

Aux Gain

Adjusts the gain (amplification) applied to the Aux in socket.

Digital out

On	Switches the output on all the time. Select this option if connecting the
	Digital out to the digital inputs of an external amplifier or a recorder without
	synchro-record function.
Off/Timer	Switches the output off until a timed event specifying the output is selected. Some
	external recorders can be set to detect when a digital S/PDIF signal is present
	(synchro-record) and start recording. If using a synchro-record method you should
	select this option so that your recorder can detect when the recording is to start.

Other settings

Contrast

Turn the Tune knob to adjust the screen contrast and push to set the level.

Brightness

Turn the Tune knob to adjust the screen brightness and push to set the level.

Standby brightness

Turn the Tune knob to adjust the screen brightness when the unit is in standby and push to set the level. Note The lowest setting switches the backlight off.

12/24 hour clock

Turn the Tune knob to choose 12 hour mode or 24 hour mode and push to confirm the change. The time format applies to the small clock at the top of the screen and the full screen clock display but alarm and timer settings are always presented in 24 hour format.

Software upgrade

Displays the current software version installed on your EVOKE-3 and gives access to the Software Upgrade option. Register your product and include an e-mail address to receive notification of software updates or visit our website at www.pure.com/support.

To upgrade your software, connect your PC using a suitable type A to type B USB cable, push the Tune knob to select OK and follow the instructions on screen.

Note USB upgrade requires a PC (not Mac) running Windows XP and a suitable USB cable (not included).

Standby menu

If energy saving mode is switched off, some menus are available when the radio is in standby to enable you to change options without switching the radio on. For example, you can set an alarm without switching the radio on. Press the Menu button in standby to access these options.