Polk Audio TSi Series manual PSW125, PSW111, Powerport

8PERFECTLY MATCHED SUBWOOFERS

PSW125

12" Dynamic Balance composite woofer Driver creates tight, musical bass. Downward firing port couples to the room for more bass impact.

More powerful motor structure for a higher BL product, (the measure of the motive force applied to the cone) results in louder, deeper and punchier bass than previous Polk woofers in this price category. Klippel Optimized woofer—by using a state-of-the-art Klippel Distortion Analyzer, Polk engineers were able to optimize the woofer’s motor structure, voice coil alignment and suspension for the best possible performance even at extreme listening levels. Compression circuitry limits distortion at earth-shaking volume levels.

Built-in high current amplifier supplies all the good, clean power you need for big bass. The PSW125 features a Class A/B Amp.

12" POWERED SUBWOOFER, 100 WATTS CONTINUOUS AVERAGE OUTPUT OVERALL DIMENSIONS:

14 1/2" H X 14 1/4" W X 17" D (36.83CM H X 36.2CM W X 43.18CM D) OVERALL FREQUENCY RESPONSE: 60Hz - 110Hz

SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.

BLACK CHERRY

PSW111

PSW111 compact design is the perfect complement to Polk TSi Series and tucks easily out of the way. Dynamic Balance® composite 8" driver produces an incredibly tight, musical bass.

Downward firing port couples to the room for more bass impact.

Powerful motor structure for a higher BL product, (the measure of the motive force applied to the cone) results in astonishingly loud, deep bass from a surprisingly small enclosure.

Klippel Optimized Woofer—the woofer’s motor structure, voice coil alignment and suspension have been optimized for the best possible performance even at extreme listening levels.

8" POWERED SUBWOOFER, 150 WATTS CONTINUOUS AVERAGE OUTPUT OVERALL DIMENSIONS:

12 1/8" H X 11" W X 13" D (30.79CM H X 27.94 CM W X 33.02CM D) OVERALL FREQUENCY RESPONSE: 28Hz - 200Hz

SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.

BLACK

PSW125 PSW111

polk technology

POWERPORT®

Polk Audio loudspeakers shatter the boundaries of bass response with patented PowerPort bass venting technology. Conventional ports have limitations: air turbulence at the mouth of the port can cause “port noise” and bass output losses of up to 3dB. (A loss of 3dB means that half of your amplifier power is being wasted on turbulence instead of bass!) The distinctive design of the Polk Audio PowerPort gradually slows air exiting the port, vastly reducing turbulence, port noise and energy loss. The result is bass that you will feel as well as hear; bass that reaches out, grabs you by the lapels and shakes you up—for a completely visceral and emotional movie and music experience. See more about Power Port at www.polkaudio.com/catalog/technology/.