VIPowER VP-8059L 2 ATA/ATAPI Device Compatibility, Power Requirements, Drive Type +5V +5V/+12V

1-1.2 ATA/ATAPI Device Compatibility

•ATAPI removable drives: Iomega Zip 100MB/250MB and Clik!, LS-120 Super Floppy, Sony HiFD 200MB, MO drives, tape drives

•Enhanced IDE and ATA hard drives: both 2.5” and 3.5” form factors, any capacity

•ATAPI CD-ROM drives: CD-ROM, CD-R, CD-RW, DVD drives, compatible with all major CD-RW software

•ATA removable media drives: SyQuest SyFlyer, SparQ and Syjet, Castlewood ORB. Supports media change and disk ejection

1-1.3 Power Requirements

•+5V devices: +5V devices can draw power directly through the 1394 port connection, the +5V/+12V power adapter, or an optional +5V power adapter

•+5V/+12V devices: +5V/+12V devices require the use of a +5V +12V AC/DC power adapter (included)

Typical power requirements for ATA/ATAPI device types:

Drive Type	+5V	+5V/+12V
Zip	X
LS-120 SuperDisk	X
MO	X
Tape		X
2.5” HD	X
3.5” HD		X
CD-ROM		X

IMPORTANT

It is recommended that the +5V/+12V power adapter be used for all devices whenever possible to avoid any power problems.

1-1.4 Unpacking Your FireWire 1394dock Docking Kit

Before installing the FireWire 1394dock, verify that the following items are included in the carton. If any parts are damaged or missing, please contact your local dealer or sales representative immediately.

•One FireWire 1394dock interface unit

•One +5V +12V AC/DC power adapter and power cord

•One FireWire 1394 cable

•Mounting screws (16 screws) (for Model VP-8059 only)

•One Mobile Rack Stand Set (4 pieces) (for Model VP-8059 only)

•One Mobile Rack (VP-10LSF) (for Model VP-8059 only)

2 FireWire 1394dock Installation Manual