Control Commands RS232 Serial String Commands

ADDITIONAL NOTES:

THREADED INSERT FOR INSTALLATION OF BASE UNIT IN PUBLIC PLACES:

A)Remove the two race track shaped bump-ons from the bottom of the docking station to expose two threaded inserts.

B)Use M4x0.7 machine screws (not supplied) to secure the XIS100 base unit in place.

C)While screw length will be determined by mounting surface thickness, XIS100’s maximum thread depth is 8mm.

CONTROL COMMANDS – RS232 SERIAL STRING COMMANDS

See document 08905193 – XIS100 Serial Protocol.

Please visit www.xantech.com and look for the XIS100 product page. At the bottom of the product page there will be a link to the document. A dealer login and password is required to access the XIS100 Serial Protocol document. If you are not a Xantech-authorized retailer, please contact your Xantech dealer for this information.

PRODUCT DIMENSIONS AND PACKAGE WEIGHT

BASE STATION

REMOTE CONTROL

PACKAGE WEIGHT

6” W x 4-1/4” D x 1-1/4” H (153 mm x 108 mm x 32 mm) 6-1/8” L x 1-3/4” W x 5/8” H (156 mm x 45 mm x 16 mm)

2.2 lbs (1.0 kg)

Xantech Corporation

13100 Telfair Avenue, Sylmar CA 91342 Xantech.com

Document # 08905180D

This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.

iPod is a registered trademark of Apple Computer, Inc. All other marks are registered trademarks and trademarks of


08905180D	- 12 -