Kenmore 625.3844 owner manual Typical Installations / Tools and Materials Needed

TYPICAL INSTALLATIONS / TOOLS AND MATERIALS NEEDED

INSTALLATION ON COPPER PLUMBING USING COMPRESSION FITTINGS

FILTERED

WATER

apply several wraps of Teflon tape

optional shutoff valve

nut

brass ferrule

compression adaptor

INLET

3/4" NPT

WATER

IN

Note: Be sure to allow a minimum space of 1-1/2" under the filter for removing the sump, to change the cartridge.

- MATERIALS AND TOOLS NEEDED -

I_ 2 compression adaptors, 3/4" NPT x comp. (compression end to fit existing copper pipe) I_ Teflon tape

I_ tubing cutter

I_ sandpaper or emery-cloth

I_ 2 wrenches, either open end or adjustable jaw, size to fit compression adaptors

SOLDERED COPPER INSTALLATION

(OBSERVE FIG. 1 NOTES)

adaptor,

....... 3/4" NPT x sweat

(apply several wraps of

Teflon tape to threads)

IN i/}J

WATER

optional shutoff valve 3/4" copper pipe, as req'd.

- MATERIALS AND TOOLS NEEDED -

(see page 5)

THREADED INSTALLATION

(OBSERVE FIG. 1 NOTES)

3/4" hex nipple (2)

3/4" nipple

optional shutoff valve	union fitting (2) /
- MATERIALS AND TOOLS NEEDED -	3/4" pipe, as required
(see page 6)