Klipsch P-37F, P-27S Preparing the Loudspeaker, There is a specific procedure to be followed

Page 5

Preparing the Loudspeaker

Connection Procedure:

There is a specific procedure to be followed:

•Switch off and unplug the amplifier/s and all source electronics from the mains power.

•Place both loudspeakers in the general area where you want them.

•Connect each loudspeaker following the instructions under the “connecting the loudspeakers” section of this manual.

•Attach the spikes, following the instructions under the “finalizing the assembly” section of this manual

•Run both sets of loudspeaker cable to the amplifier

•Connect the amplifier

•Finalize the position of the loudspeakers.

•Finally, fit the grilles (if desired)

TAKE CARE NOT TO TOUCH THE DRIVE UNITS WHEN YOU MOVE THE LOUDSPEAKERS AROUND.

TO PRESERVE THE FINISH, WHEN HANDLING YOUR SPEAKERS, USE THE GLOVES THAT ARE PROVIDED.

Fitting and Removing the Grilles

The grilles are magnetically attached to the cabinet. Specially designed magnets are housed inside the front wall of the loudspeaker, so that if you wish to operate the loudspeaker with the grilles removed, no grille mounting hardware is visible. This preserves the smooth lines of the loudspeaker.

To fit the grilles: Fit the top grille first and line it up with the top and sides of the cabinet. For the P-38F, P-37F and P-17B there is a small lip on the top of the grille that should rest on the top of the cabinet. Now, fit the lower grille, lining up the top of the lower grille with the bottom of the upper grille. You may now remove the top grille if you wish. (The P-17B, P-27C and P-27S have a single one-piece grille only.)

Although operating the loudspeakers with the grilles on or off is a matter

of personal taste, moving or connecting the loudspeakers should always be done with the grilles removed. Be especially careful not to touch the drive units.

Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Palladium General Cautions Important Safety InstructionsIf you are using the floor spikes Introduction Unpacking P-38F / P-37F Getting StartedPreparing the Loudspeaker There is a specific procedure to be followed38F / P-37F / P-17B Positioning Loudspeakers StereoGeneral Observations Positioning Loudspeakers Home TheaterCenter Channel Positioning Positioning Center and SurroundsSurround Channel Positioning Front ViewCables, Crossovers and Connections Connecting a TerminalStandard Single Wiring Connecting the LoudspeakersTerminal Panel Standard ConnectionBi-amping Bi-wiringTo multi-amp, the following criteria are essential Worse than ordinary biFittting Spikes P-27C only Finalising the AssemblyDressing the Cables Leveling the LoudspeakersPhase Final AdjustmentsConclusion Happy listeningDesign About Your LoudspeakerAn International Project Bass Drivers Loudspeaker ComponentsMid and Treble Network Treble Compression DriverCrossover Network Tractrix Horn Design CabinetWarranty Care and MaintenanceWarranty Outside The United States and Canada Conclusion
Related manuals
Manual 11 pages 31.88 Kb

P-17B, P-27C, P-38F, P-27S, P-37F specifications

Klipsch, renowned for its commitment to audio excellence, offers a range of high-performance speakers that cater to audiophiles and cinephiles alike. Among these, the P-17B, P-38F, P-37F, P-27C, and P-27S stand out, each designed with unique features and cutting-edge technologies.

The Klipsch P-17B is a compact bookshelf speaker that packs a punch. With its Tractrix Horn-loaded tweeter, it delivers crisp and detailed high frequencies, making it a perfect choice for music lovers. Its 5.25-inch woofer provides deep bass response, ensuring that every note is heard. The speaker's minimalist design, combined with premium materials, ensures it blends seamlessly into any setting.

Moving up, the P-38F is a powerful floorstanding speaker that features dual 8-inch woofers, delivering enhanced bass performance and dynamic range. The P-38F utilizes Klipsch’s exclusive LTS tweeter, which minimizes distortion and ensures clear, detailed sound reproduction. Additionally, the Tractrix port design reduces turbulence, allowing for tight and accurate bass responses, making it ideal for home theater setups.

The P-37F also belongs to the floorstanding category, offering a slightly different sound profile. Its three-way design incorporates a 6.5-inch midrange driver for improved vocal clarity and a seamless transition between the highs and lows. The combination of dual 8-inch woofers and a Tractrix-loaded tweeter results in a wide soundstage and impressive imaging, making it an excellent choice for both music and movies.

For center channel performance, the P-27C is a standout. It features dual 5.25-inch woofers, providing powerful dialogue intelligibility and clarity in movie soundtracks. The Tractrix Horn technology enhances high-frequency performance, ensuring speech remains clear and engaging, which is crucial for an immersive home theater experience.

Lastly, the P-27S serves as a satellite speaker ideal for surround sound setups. Its compact design, featuring a 4-inch woofer and a Tractrix Horn tweeter, delivers remarkable sound quality without taking up much space. Perfect for mounting on walls or placing on shelves, the P-27S completes a multi-channel system with rich, detailed audio across all frequencies.

Overall, Klipsch's P series speakers, including the P-17B, P-38F, P-37F, P-27C, and P-27S, combine innovative technologies and aesthetic design to create a rich audio experience tailored for any environment, making them an excellent choice for anyone looking to elevate their sound.
Top Page Image Contents