Klipsch 2 But First Types of Connectors, Speakers to Amplifier Keeping IT Straight, Connections

Page 3

You may also use an optional wall or ceiling mount that will fit the provided 3/8” – 16 inserts. Please see your authorized Klipsch dealer to see which model is right for you.

CONNECTIONS

Note: Proper connection of your speakers to your amplifier or receiver is vital to obtaining good sound quality. Please follow these directions carefully. Sloppy connections can cause amplifier malfunction or damage. We recommend that you use 16-gauge or heavier stranded copper wire. Use a lower gauge (heavier) wire for longer runs to reduce the amount of amplifier power lost due to the wire’s resistance.

BUT FIRST: TYPES OF CONNECTORS

Bare wire. Pull the two conductors apart for about an inch and strip approximately 1/4-inch of insulation from the end of each. (A wire stripper will simplify this, but you can use an ordinary pocket knife to cut around and through the insulation down to the wire.) Twist the strands of wire on each individual conductor tightly together. Loosen the nuts on a pair of binding posts until the holes through the metal posts are exposed, then insert the bare wire through the holes. Screw the nuts down finger-tight on the wire. Make sure that no strands of wire are touching from one bind- ing post to the other or to any strands from the other conductor. Failure to observe this precaution at either end of the connection can result in amplifier malfunction or damage.

Pins. Many pre-made speaker cables are terminated with metal pins. Loosen the nuts on a pair of binding posts until the holes through the metal posts are exposed, then insert the pins through the holes. Screw the nuts down finger-tight on the pins — do not overtighten. Make sure that there is no metal-to-metal contact between the two pins or binding posts. Failure to observe this precau- tion at either end of the connection can result in amplifier malfunction or damage.

Spade lugs. Some speaker cables are terminated with U-shaped connectors called spade lugs. Loosen the nuts on a pair of binding posts and slip the spade lugs around the metal posts. Screw the nuts down finger-tight on the lugs and inspect to ensure they have remained firmly in place. Make sure that there is no metal-to-metal contact between the two lugs or binding posts. Failure to observe this pre- caution at either end of the connection can result in amplifier malfunction or damage.

OTHER TYPES OF SPECIALTY CONNECTORS ARE AVAILABLE TO FACILITATE HOOKING UP YOUR SPEAKERS. PLEASE CONSULT YOUR AUTHORIZED KLIPSCH DEALER FOR SUGGESTIONS AND FURTHER DETAILS.

SPEAKERS TO AMPLIFIER: KEEPING IT STRAIGHT

(AW-400, AW-500, AW-525, AW-650 models)

One of the most important things about hooking up your speakers is keeping them in the same polarity, or phase. If they are connected out of phase, bass and sound imaging will be degraded. The easiest way to ensure that your speakers are wired in phase is to always connect the positive and negative output terminals on your amplifier or receiver to the matching input terminals on your speakers: positive (“+”, color-coded red) to positive and negative (“–”, color-coded black) to negative. (See Figure 1.)

Figure 1

(AW-500-SM model)

The AW-500-SM can operate in two modes. When using one speaker, flip the switch to the “Stereo” position and connect the “Front” or “Main” left and right channels of your system’s power amplifier to both inputs (See Figure 2A). When using more than one AW-500-SM, flip the switch to the “Mono” position and connect either output of your system’s power amplifier to either input cup (See Figure 2B).

A

Figure 2

 

B

(AW-800-SW)

The AW-800-SW can operate in two modes. If the amplifier you are using is mono, flip the switch to the left and connect the output of your system’s amplifier to either of the two input connectors (See Figure 3A). For stereo use, flip the switch to the right and connect the output of your system’s amplifier to both input connectors (See Figure 3B).

A

Figure 3

 

B

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Reference ALL Weather Outdoor Speaker AW-800-SW Important Safety InstructionsAbout Your Klipsch Purchase AW-400, AW-500, AW-525, AW-650, AW-500-SM modelsAW-500-SM model But First Types of ConnectorsSpeakers to Amplifier Keeping IT Straight AW-400, AW-500, AW-525, AW-650 modelsWarranty Outside the United States and Canada WARRANTY-U.S. and Canada onlyPainting Consignes DE Sécurité Importantes Placement des enceintes de plafond encastrablesGarantie ÉTATS-UNIS ET Canada Uniquement Commandes DE FonctionnementAppuyez sur la grille pour la mettre en place Pavillon orientable modèles muraux encastrablesUbicación de los altavoces en el cielo raso Instrucciones Importantes DE SeguridadUSE Sólo los accesorios especificados por el fabricante Ubicación DE LOS Altavoces Empotrados EN LA ParedGarantía Fuera DE LOS Estados Unidos Y Canadá Encaje la rejilla a presiónControles DE Operación Trompeta pivotante modelos empotrados en la paredWoodview Trace, Suite 200 Indianapolis, Indiana

2 specifications

Klipsch, a well-known name in the audio industry, has a rich history of producing high-quality speakers, headphones, and home audio systems. Among its iconic offerings, the Klipsch 2 series stands out for its exceptional sound quality, innovative technologies, and user-friendly designs.

One of the main features of the Klipsch 2 is its dynamic sound performance. Engineered for clarity and detail, the speakers utilize Klipsch's proprietary horn-loaded technology, which is designed to produce a high level of efficiency. This horn loading allows the speakers to project sound over a greater distance, ensuring that every note is heard with precision and accuracy. The result is an immersive listening experience that is sure to please audiophiles and casual listeners alike.

Another hallmark of the Klipsch 2 series is its robust build quality. Constructed with premium materials, these speakers are designed to withstand the rigors of regular use while providing stunning audio reproduction. The durable enclosure not only enhances the aesthetics but also minimizes unwanted vibrations, allowing for a cleaner sound presentation. Further, the speakers often feature a stylish design, making them a great addition to any home or office environment.

Incorporating advanced technologies, the Klipsch 2 series often employs new audio innovations such as the Tractrix horn technology. This technology optimizes high-frequency performance, resulting in low distortion and wider dispersion of sound, ensuring that listeners can enjoy high-quality audio from various angles in the room.

Compatibility is another strong point of the Klipsch 2. These speakers are designed to work seamlessly with various audio systems and devices. Whether connecting to a computer, television, or home theater system, they deliver an outstanding sound experience that elevates movie night or music listening sessions.

Additionally, the Klipsch 2 often features user-friendly controls that allow for easy setup and customization of sound profiles. Many models in this series come with an onboard amplifier, enabling users to adjust the volume and other settings directly on the speaker or through a remote control.

In summary, the Klipsch 2 series embodies the brand's commitment to quality, performance, and style. With dynamic sound capabilities, durable construction, advanced audio technologies, and versatile compatibility, the Klipsch 2 is an excellent choice for anyone looking to enhance their audio experience. Whether for casual listening or a full home theater setup, these speakers promise to deliver the immersive sound quality that Klipsch is renowned for, making them a worthwhile investment for audio enthusiasts.
Top Page Image Contents