Using the KE-8

To open the KE-8, grip the unit as shown. Press outward with the right hand and pull in with the left. Simultaneously, swing the speakers open and into the operating position.

If you are not using battery power, connect the adapter (10) to the power jack (5) and plug the adapter into a power outlet.

Turn on the power switch (4). Notice that the blue light (8) comes on.

Use your thumbnail to grip the underside of the iPod dock tray. Move it forward to the stop.

Mount your iPod on the KE-8 and initiate play using the controls on the iPod.

Increase the volume to the desired level by pressing the top portion of the volume control (6).

To turn the KE-8 off, slide the power switch (4) to the off position. Remember to turn off your iPod or any device connected to the line-in jack (7).

Charging your iPod

Note: Docking iPods will only be charged when the KE-8 is powered from the AC Adapter. (Except iPod Shuffle and 3rd Generation iPod)

Using the KE-8 with non-docking devices

The KE-8 can be used with any device that has a headphone output. Use the supplied interconnect cord (11) to connect the “Line in” jack (7) to the headphone output of the source that you wish to listen to through the KE-8.

Suitable sources are small TVs, laptop computers, generic MP3 players, non- docking iPods, portable CD players, and headphone radios.