Krell Industries MP3 Docking Station specifications KID Specifications, Papa Dock Specifications

Page 1

Specifications

Krell Interface Dock

KID SPECIFICATIONS

Inputs

1 30-pin iPod-device type

1 3-conductor 3.5 mm connector

Audio Outputs

1 pair balanced via XLR connectors

1 pair single-ended via RCA connectors

Video Outputs

1 S-Video via a DIN connector

1 Composite via a RCA connector

Control Inputs

1 RS-232 input via a 9-pin D-subminiature connector

Control Outputs

1 12 VDC trigger output via 2-conductor

3.5mm connectors (500 milliamps maximum per output)

Input impedance

Single-ended: 47.5 k Ohms

Output impedance

Balanced: 50 Ohms

Single-ended: 25 Ohms

Volume Control

256-step Digital Control

Input Overload

Single-ended: 4 Vrms

Output Overload

Balanced: 16 Vrms

Single-ended: 8 Vrms

Frequency Response

20 Hz to 20 kHz +0.7 dB, -0.0 dB

0.1Hz to 90 kHz +0.7, -3 dB

Tone Control Range Bass: +8 dB, -7 dB Treble: +6 dB, -6 dB

Total Harmonic Distortion Plus Noise Balanced Output: <0.002%, 20 Hz to 20 kHz, 4 V RMS or 4 mA rms

Signal-to-noise Ratio

Wideband, Unweighted: >94 dB

“A” Weighted: >97 dB

Power Consumption Standby: 10 W Power on: 25 W

Dimensions

Inches: 13 W x 2.8 H x 10.9 D

Centimeters: 33.0 W x 7.0 H x 27.7 D

Weight

Unit Only: 10 lb., 4.5 kg

Shipped: 14 lb., 6.4 kg

All operational features, functions, specifications, and policies are subject to change without notification.

PAPA DOCK SPECIFICATIONS

Frequency Response

20 Hz to 20 kHz, +0, -0.15 dB <0.2 Hz to 110 kHz,+0 dB, -3 dB

Signal-to-noise Ratio

Wideband, unweighted, referred to full power output:

>108 dB

“A” weighted: >116 dB

Gain: 26.2 dB

Total Harmonic Distortion (THD)

<0.03%@ 1 kHz, at 150 W, 8 Ohms

<0.20%@ 20 kHz, at 150 W, 8 Ohms

Input Impedance 90 kOhms

Input Sensitivity 1.70 Vrms

Output Power, each channel driven: 150 Wrms @ 8 Ohms

300 Wrms @ 4 Ohms

Output voltage

98 V peak-to-peak, 35 Vrms

Output current: 15 A peak

Slew Rate: 50 V/s

Output Impedance <0.073 Ohms at 20 Hz

<0.084 Ohms, 20 Hz to 20 kHz<

Dampening Factor

110 at 20 Hz, referred to 8 Ohms

95, 20 Hz to 20 kHz, referred to 8 Ohms

Power Consumption

Stand-by: 25 W, Idle: 55 W, Maximum: 900 W

Heat Output, BTU/hr.

Stand-by: 85, Idle: 190, Maximum: 1100

Inputs

1 40-pin KID connector

1 RS-232 (to control KID) via a 9-pin D-subminiature connector

Outputs

2 channel via 5-way binding posts

Remote Connectors

One 12 VDC output (12 V trigger), 30 mA maxi- mum, via a 3.5 mm connector

S-Video (from KID) via mini-DIN connector

1 composite video (from KID) via RCA connector

Dimensions

Inches: 17.3 W x 5.7 H x 16.3 D

Centimeters: 43.8 W x 14.5 H x 41.3 D

Weight

Unit Only: 39 lb., 17.6 kg

Shipped: 49 lb., 22.2 kg

Your KID product serial number is:

Papa Dock

Owner’s Reference

POWER

BASS

TREBLE

VOLUME

AUX

 

 

 

 

INPUT

POWER

12 Krell / Papa Dock

P/N 301038 v 08.0

Image 1
Contents Papa Dock Specifications KID SpecificationsTOP and Front Panel only Krell / Papa DockFront Panel and Remote Remote onlyIntroduction SpecificationsTOP only Front Panel only1UNPACK the KID Insert the IPOD-DEVICE Into KID Dock ConnectorUnpack the Papa Dock OperationAffix the iPOD-DEVICE Support to the KID TOP Cover Install the Battery KID RemoteKID / Papa Dock Connection Connect to Your System