Acomdata.com RPDOCKU2FA manual Technical Specifications

18

Supports up to 127 devices

Connecting more than one or two USB devices to a computer typi- cally requires the use of one or more hubs; each hub can accommo- date several USB devices.

Master-slave architecture

The computer (master) dictates data flow between attached devices (slaves).

Cable length up to 5 m

On-bus power up to 2.5 W

Suitable for low-powered devices such as flash card readers.

Plug & Play

You do not need to assign unique ID numbers, or connect termina- tors. On most operating system you do not need to install drivers.

Hot-swappable

Devices can be added and removed while the computer is running. Also, you can turn off a device when not needed.

Model #:

RPDOCKU2FA

19

TECHNICAL SPECIFICATIONS

Interfaces:		- non-operating: .-40 – +70 ºC;
FireWire (IEEE 1394a) – 400 Mbps		Humidity:
USB 2.0 – up to 480 Mbps
Physical		- operating :	5 – 90 %
		- non-operating: .5 – 95%
Dimensions:
W 4.7" x H 1.85" x L 7.4"
Weight:	450g
Electrical
Input DC voltage: .... 19~25V
Input current:	4A max
Input power:	75W max
Output voltage:	12V +/- 5%
Output current: .... 5A average,
6A peak (10 sec)
Efficiency:	>90%
Environmental
Temperature:
- operating:	+5 – +40 ºC;