JVC RC-BM5 manual Recording, To stop recording, Using the beat-cut function

RECORDING

Basic operation

1 2 3

STANDBY

1Prepare the recording source.

•When recording from the radio

Set to the TUNER mode and tune in a desired station.

•When recording from a CD

Set to the CD mode and load a CD.

2Load a blank or erasable cassette. Use only a type-I normal tape.

3Press the ¶ REC and 2 PLAY buttons simultaneously.

To stop recording

Press the § STOP/EJECT button.

The tape also stops when it reaches the end.

Notes:

•It should be noted that it may be unlawful to re- record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic work embodied therein.

•In recording, the ALC circuit automatically optimizes the recording level. Adjustment of the recording level is unnecessary.

•If a recording you made has excessive noise or static, the unit may have been too close to a TV which was on during the recording. Either turn off the TV or increase the distance between the TV and the unit.

2

Using the beat-cut function

When recording an AM broadcast, beats may occur. If this happens, press the FM MODE/BEAT CUT button to select the better beat-cut position, “BEAT 01” or “BEAT 02”.

To start recording at the exact moment

1 Press the 8 PAUSE button first, then press the

¶REC and 2PLAY buttons simultaneously, thus entering the record-pause (standby) mode.

2 Press the 8 PAUSE button to release the tape at the exact moment you want to start recording.

Note:

Do not leave the unit in pause mode for more than a few minutes. Instead, press the §STOP/EJECT button to stop the tape.

20