Operation
(5) Air flow direction adjustment
After operation mode is selected, horizontal flap will open automatically according to the mode. Referring to the Fig.
COOL
About 10o 
Up and down (Use remote controller)
Press SWING button, horizontal flap will move within the range shown in the Fig. Press SWING button stop it at a fixed position.
About 10o
COOL About 45o
Left and right air flow adjustment (manual)
Move the vertical blade by a knob on air conditioner to adjust left and right direction referring to Fig.
Cautions:
It is advisable not to keep horizontal flap at downward position for a long time in COOL or DRY mode, otherwise, condensate water might occur.
(6) Unit stop
Press ON/OFF button. Only time remains on LCD.
All indicators on indoor unit go out. Horizontal flap closes automatically.
Cautions:
When humidity is high, condensate water might occur at air outlet if all vertical louvers are adjusted to left or right.
Cautions:
Unit won't restart until 3 minutes have elapsed, due to system protection.
Hints
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more helpful for a better air circulation.
Be careful not to catch a cold when cold air blows downward.
It is harmful to your health in summer to go frequently in and out of places where temp. difference is above 7oC. Temp. difference of
More than this, unit's load can be reduced and power consumption cut down as well. So, you'd better set a temp. difference of
9