Sylvania SDVD7045 user manual Read all instructions before using, Battery Handling and Usage

Read all instructions before using

Do not use this product near water.

Do not ceiling- or wall-mount the product.

Install the product in accordance with the operating instructions.

Do not set the product near heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the product.

Do not use attachments not recommended or sold by the product manufacturer as a risk of fire, electrical shock, or serious personal injury may result .

Unplug the product during lightning storms or when unused for long periods of time.

Do not expose the product to dripping or splashing water. Do not place objects filled with liquid (e.g., vases) on the product.

Do not place in or expose the product to direct sunlight, extreme heat, humid or dusty locations.

Never operate this product if it has a damaged power cord or plug, is not working properly, has been dropped, damaged, or exposed to moisture, water, or other liquids. Do not attempt to examine or repair this product yourself; take the product to a service centre for inspection and repair.

Keep magnetic objects such as speakers,at a distance from the player.

LASER SAFETY

This set employs an optical laser beam system in the CD mechanism designed with built-in safeguards. Do not attempt to disassemble. Exposure to this invisible laser light beam may be harmful to the human eye. This is a Class-1 laser product. Use of controls, adjustments or procedures other than thos e specified herein may result in hazardous laser light beam exposure. This compact disc player should not be adjusted or repaired by anyone except qualified service personnel. The laser mechanism in the set corresponds to the stylus (needle) of a record player. Although this product uses a laser pick-up lens, it is completely safe when operated according to directions.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications. Such modifications could void the user's authority to operate the equipment.

1)Operate turning controls and switches as instructed in the manual.

2)Before turning on the power for the first time,make sure that the power cord is properly installed.

3)Store your discs in a cool area to avoid damage from heat.

Battery Handling and Usage

NOTE: This style player contains rechargeable Li-ion battery . There is a CR 2025 battery for remote control.

1). Never throw batteries into a fire. Do not expose batteries to fire or other heat sources.

2). Battery Disposal: Spent or discharged batteries must be properly disposed of and

recycled in compliance with all applicable laws. For detailed information, contact your local solid waste authority.

Troubleshooting

Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or an adjustment on your part may eliminatethe problem and restore proper operation.

Symptom(Common)	Remedy
No power.	Insert the AC adaptor securely into the power outlet.
Play fails to start even when	Condensation has formed: wait about 1 to 2 hours
	to allow the player to dry out.
PLAY is pressed.
	This player cannot play a disc other than DVD, VCD and
Play starts but then stops
	CD.
immediately.
	The disc may be dirty and may require cleaning.
	Ensure that the disc is installed with the label side up.
No picture.	Ensure that the equipment is connected properly.
No sound .	Ensure that the equipment is connected properly.
	Ensure that the input setting for the TV and stereo
Distorted sound .
	system are correct.
	Adjust the master volume to a suitable volume by rotating
	the volume knob at the side of the player.
Picture is distorted during rapid	The picture will be somewhat distorted at times: this is
advance or rapid reverse .	normal.
No rapid advance or rapid	Some discs may have sections which prohibit rapid
reverse play	advance (or rapid reverse.)
No operations can be performed	Check the batteries are installed with the correct polarities.
	The batteries are exhausted: replace them with new ones.
with the remote control unit.
	Point remote control at the remote control sensor and
	operate.
	Operate the remote control unit at a distance of not
	more than 6 m from the remote control sensor.
	Remove the obstacles between the remote control and
	remote control sensor.
No key operation (by the main	Disconnect the power adaptor and then reconnect it. (The
unit and/or the remote control	player may not be operating properly due to lightning, static
unit) is effective.	electricity or some other external factor.)

—To be continue d

2 27