Connecting to the monitor
The unit can also be connected to the external LCD monitor.
Connect the unit to power by AC/DC adapter or cigarette lighter adapter.
In Car Installation
1. Fit the headrest mount to the DVD Player / Monitor as required.
Then connect the unit DC OUT jack to DC IN
jack of the Monitor.
Please refer to the illustration below.
C1
A
C2 
The DVD player will fit to the mount
D1 | in this position, as shown below. |
|
B
OK
D2
SD |
| AV OUT DC OUT | |
|
|
|
|
Turn the headrest and player around so the backs are facing you.
E1 
A
E2
F1
B
F2
Slide the vertical straps A and B through the strap lock upon the back of the DVD player, or monitor, as shown.
Fold and secure the horizontal straps on to the back of the mount until the velcro attaches. Ensure the DVD player or monitor is mounted centrally.
Note: You're advised to supply both units the power by the cigarette lighter adapter only. The AC/DC adapter is used to supply power of one unit only and as the charger to charge the main unit if it's with
Turn the headrest and player around so the front is facing you.
Bring straps C1, C2, D1 &D2 in front of the DVD Player and attach to the velcro as shown.
C1
D1
OK |
C2 | D2 |
NOTE: Both the headrest mounts are the same, there is no difference for DVD Player or Monitor.
6 | 7 |