System Connection, Powering and installation

System Connection

Powering and installation

Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the machine, then plug the other end into the AC power receptacle. Please refer to the following illustration

DC IN 9-12V

AV OUT DC OUT

If using car cigarette lighter adaptor to connect to the power:

Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug the other end into the car cigarette lighter socket. See illustration below.

DC IN 9-12V

AV OUT DC OUT

Notice:

1.Car cigarette lighter adaptor can't be used to recharge the battery.

2.Car cigarette lighter adaptor is available to use only when the carpower supply is 9-12V.

Using SD/MMC card

Upon using an SD or MMC card, insert it into the corresponding slot flatly with the label side frontward until you hear a click.

Using USB

Upon using an USB, insert it into the USB slot directly.

Connecting to the monitor

The unit can also be connected to the external LCD monitor.

Connect the unit to power by AC/DC adapter or cigarette lighter adapter.

Then connect the unit DC OUT jack to DC IN 9-12V Jack of the LCD Monitor by a DC/AV cable. Also use this DC/AV cable to connect the AV OUT jack of the unit to AV IN

jack of the Monitor.

Please refer to the illustration below.

DC IN 9-12V

AV OUT DC OUT

ON/OFF

Note: You're advised to supply both units the power by the cigarette lighter adapter only. The AC/DC adapter is used to supply power of one unit only.