Microphone and Speakers Contd, Digital Module

Kenwood USA Corporation

July-07

MICROPHONE AND SPEAKERS CONT'D

KHS-15-BH2

KHS-15-OH2

Hvy-duty noise reduction behind-the-headset w/noise cancelling boom mic & in-line PTT		400.00
(black); NRR24 db	[Intrinsically Safe Approved Accessory] [SEE Note B]
(black); NRR24 db	[Intrinsically Safe Approved Accessory] [SEE Note B]	350.00

Note A: "Beige-colored" 2-wire & 3-wire mic models; Allow min. 4 weeks delivery time.

Note B: Heavy-duty headsets; Allow min. 4 weeks delivery time.

CIM-1000	G-Star® or MDC1200 ANI Board : PTT ANI, emergency & man-down [Intrinsically Safe
	Approved Accessory] - Factory Install Only –Order L-1038 or 1039.
CIM-CABLE	Serial Program Cable
	CIM-1000 programs via Windows Hyper terminal (Windows Ver 3.1 or later) or any
	ProComm version; board must be installed in a powered radio for programming. The
	radio programmer does NOT program the CIM-1000. CIM-CABLE is a DB-9 PC
	connector with 3 short lead with clips and may require a PC serial extension cable
KCT-56MS	Emergency Man-Down Internal Tilt Switch
KCT-56MS	[Intrinsically Safe]- Must be Kenwood installed for I.S.
	Order L-1059 for install
	FleetSync® Emergency Man-Down Internal Tilt Switch
KCT-56MS	[Intrinsically Safe]- Must be Kenwood installed for I.S.
KCT-56MS	Order L-1060 for install

125.00

59.00

21.00

*****************

Programming interface cable

USB Adapter for KPG-xxAM DB9F Programming Interface Cables (DB9M - to - USB Type A connector);

Program Software for TK-190/6110 (Version 2.00)

Call Kenwood Parts at 800-367-7514 to order the following:

Portable-to-Portable Cloning cable (For TK-290/390/480/481 Only)

N/A

81.67

N/A

L-836	Assemble KMB-16 with six KSC-20's/24's
L-961	Assemble KMB-23 with six KSC-32K's (Rapid Rate, 120 Volt version only)
L-835	Configure TK-190/290/390 for Intrinsically Safe (Must Order KNB-17BK) - Note: Please
L-835	see end of this pricepages section for a list of Intrinsically Safe Accessories for this
	radio.
L-979	Configure TK-190/290/390 (KNB-22NC) for Intrinsically Safe (Must Order KNB-22NC)

L-837	Install KNB-17A/17BK battery
L-870	Simultaneous transpond and alert feature up-grade for 90-series mobiles & portables

L-1038	TK-190/290/390 CIM-1000/MDC1200 ENCODER INSTALLATION
L-1039	TK-190/290/390 CIM-1000/GE STAR ENCODER INSTALLATION
L-1059	Install KCT-56MS (w/ CIM-1000K)
L-1060	Install KCT-56MS (for FleetSync®)
L-911	TK-190/TK-6110 Programming (with basic TX/RX check)
L-914	Cut KRA-21 Low Band Antenna

15.00

17.00

70.00

0.00

50.00

75.00

9.00

25.00

10.00

Page 3 of 4