Samsung DVD-VR300 Variable Search System, End search, Scan and play, Forward Intro Scan

Variable Search

System

Press the ANYKEY button to display the search screen in the stop mode. When a program is recorded, the starting point is given an Index mark for easy location. However, the VHS Index Search System (VISS) cannot recognize index marks made by old VCRs. If the VCR has trouble finding a mark, it is probably because the cassette was recorded on a VCR without VISS. If you want to index two programs in a row, set your VCR to stop, then start recording each program.

1 Go to [0:00:00] stop

Use this feature when you want to search for the [0:00:00] counter position on a cassette. Press the CLEAR button at the point on the tape where you want to set the counter to [0:00:00].

While a cassette is stopped, press the ANYKEY button. The VCR will rewind or fast forward, searching for the [0:00:00] counter position, and then automatically stop at that position.

2	End search
	Use this feature when you want to search for a blank
	position to record a program on a cassette. While a
	cassette is stopped, press the ANYKEY button. The
	VCR will fast forward, searching for a blank position,
	and then automatically stop at that position. If the
	VCR reaches the end of the tape during end search,
	the tape will be ejected.

3	Scan and play
	Use scan and play when you don’t know exactly

where a program is located on a cassette tape.

- Forward Intro Scan

Highlight “Forward Intro Scan”, then press the

ENTER button.

- Reverse Intro Scan

Highlight “Reverse Intro Scan”, then press the

ENTER button.

Playback

English - 57