Wiring method

Electric wiring

1.The wiring method of orbicular terminal

For the connection wire which end is orbicular
terminal, its wiring method is as the right figure
shown. Dismantle the screw and put it through
the ring at the end of the connection wire, then
connect it to the terminal block and tighten the
screw.	The wiring method of orbicular terminal
	The wiring method of orbicular terminal

2.The wiring method of straight terminal

For those connection wires whose end are not orbicular terminals, their wiring method is:

Loosen the connecting screw, insert the end of the wire directly into the terminal block, and then tighten screw. Pull the wire outwards slightly to confirm it is held tightly.

3.Pressing method of connection wire:

After wiring, the connection wire must be pressed with wire holding clamp. The wire holding clamp should press on the out co- ver of the connection wire. As the right fi- gure shown:

Correct pressing

Wrong pressing

Terminal block

Wire holding clamp

(Sketch map)

Note: The pressing method when there is not terminal block

Connect the wire of the same diameter to the two sides of wire ends.

Do not connect the wire of the same diameter to the same side of the wire end.

Do not connect the wires of different diameter together.

4. Connect wire between indoor & outdoor unit

As the Figure shown, arrange the connection wire properly (note: the two *ends of the connection wire are different, do not connect them reversedly).

Open the repair panel of the outdoor unit, loosen the wire holding clamp (outdoor unit).

According to the wiring method

Terminal block of

Terminal

block of

* and the wiring diagram to connect

indoor unit (A system) indoor unit (B system)

* the connection wire properly.

According to the pressing method

* of connection wire, press the con-

* nection wire properly. (outdoor unit)

A(L)

A(N)

A(C)

B(L)

B(N)

B(C)

Reinstall the wiring cover.

Terminal block of outdoor unit

Power

1PH, 220*230V, 50Hz

0010571564, AU422BIBAA specifications

The Haier 0010571564, AU422BIBAA refrigerator is designed to elevate the modern kitchen experience with its innovative features and advanced technologies. This refrigerator stands out for its impressive combination of efficiency and functionality, catering to the diverse needs of contemporary households.

One of the main features of the AU422BIBAA is its energy-efficient operation. Equipped with a high-performance compressor and state-of-the-art insulation, this refrigerator ensures that energy consumption is minimized without compromising on cooling effectiveness. This not only helps in reducing electricity bills but also contributes to a more environmentally friendly lifestyle.

The AU422BIBAA boasts a spacious interior, with adjustable shelving that allows for customizable storage solutions. Whether you’re storing large bottles, fresh produce, or leftovers, the smart design ensures that everything is easily accessible and organized. The crisper drawers are specifically engineered to maintain optimal humidity levels, preserving the freshness of fruits and vegetables for longer periods.

A standout technology in this model is the advanced cooling system. The multi-air flow system ensures that cold air is evenly distributed throughout the refrigerator, preventing hotspots and maintaining consistent temperatures. This technology promotes food safety and improves the overall preservation quality of stored items.

Additionally, the refrigerator features a sleek and stylish exterior that enhances the aesthetic appeal of any kitchen. The modern design is not just about looks; it also includes a fingerprint-resistant finish that makes cleaning easier and helps maintain a pristine appearance.

Another practical feature is the quick cooling function, which allows rapid temperature adjustment when adding new groceries. This ensures that food items are quickly brought to safe storage temperatures, prolonging their shelf life.

For those who value convenience, the AU422BIBAA integrates smart technology that enables users to monitor and control settings via a mobile app. This functionality provides users with the ability to manage energy consumption and temperature settings remotely.

In conclusion, the Haier 0010571564, AU422BIBAA refrigerator is a versatile and efficient appliance that combines innovative technologies with practical features. Its energy efficiency, spacious interior, advanced cooling system, and smart connectivity make it an excellent choice for anyone looking to enhance their kitchen experience.