POWER SOURCE
Unwind the AC power cord at the back of the unit and connect it to a power outlet.
RADIO OPERATION
1.Switch the unit ON by turning the FUNCTION switch to the RADIO position.
2.Adjust the volume by turning the VOLUME control.
3.Select the desired waveband by adjusting the BAND selector to either the AM or FM position.
4.Open the DIAL DISPLAY DOOR. Select the desired station on the DIAL DISPLAY by rotating the TUNING KNOB.
5.Switch the unit OFF by turning the FUNCTION switch to the OFF position.
ANTENNA
For FM operation, the unit is provided with an antenna wire. Move the wire until the reception is clear with no interference. Do not connect external FM antenna to an outside antenna.
This device has a
CD OPERATION
PLAYBACK
1.Rotate the FUNCTION switch to CD position.
2.Press the Open Symbol "
" on the door to open the disc door. Place a disc in the tray with the labeled side facing out.
3.Close the door, the display will show "_ _" for a few seconds, then the total number of tracks on the disc will be displayed.
4.Press the PLAY/PAUSE BUTTON to start playback.
5.Adjust the VOLUME CONTROL as desired.
6.To stop playback temporarily, press the PLAY/PAUSE BUTTON. The play mode indicator will flash. Press the PLAY/PAUSE BUTTON again to resume playback.
7.To stop playback, press the STOP BUTTON and the play mode indicator will go off.
FAST FORWARD AND FAST REVERSE
1.Press the FAST FORWARD or FAST REVERSE BUTTON to select a desired track.
2.Press the PLAY/PAUSE BUTTON to start playback of the selected track.
SEARCH FORWARD AND REVERSE DURING PLAYBACK
1.Press the FAST FORWARD or FAST REVERSE BUTTON and keep it pressed to search forward or backward for the desired point on the track.
2.Release the button at the desired point, playback will resume automatically.
REPEAT PLAYBACK
1.To select the single track repeat function, choose the track that you want to repeat, then press PLAY/PAUSE BUTTON to play the track. Press the REPEAT BUTTON once, to activate the single track repeat and the repeat indicator will flash.
2.To select the all tracks repeat function. Press the PLAY/PAUSE BUTTON to start the track. Press the REPEAT BUTTON twice, to activate the all tracks repeat function and the indicator will remain on.
3.To erase the repeat function, press again the REPEAT BUTTON until the indicator turns off.
5