FM Stereo indicator, Program Mode | Jwin JX-CD573 manual

Portable MP3 CD Radio Cassette Recorder

V10M10_IM_EN_11152007

OPERATIONAL INSTRUCTIONS

MP3 CD Playback-continued

PROGRAM MODE-continued

4.To check the program you have stored after programming is complete, press the PROGRAM BUTTON once during the CD Stop mode. The LCD DISPLAY will show

“” and blink continuously. Press the FOLDER UP/DOWN (+/-) BUTTON to read the Album number. Press the CD SKIP/SEARCH or CD SKIP/SEARCH BUTTON to read the specific track number of said Album. Press the PROGRAM BUTTON again,

LCD DISPLAY will show “” and blink continuously. Repeat the above procedure to check all stored programs.

5.To cancel the programmed memory:

•During the CD stop mode, press the CD STOP BUTTON once or

•Open the CD Door during the CD stop mode.

The PROGRAM Indicator will disappear from the LCD DISPLAY.

FM Stereo indicator

1.In FM ST mode, If FM is selected, ensure the telescopic antenna is fully extended and positioned vertically, and clear station is selected, the FM ST indicator light turn on.

2.In the case of stereo stations with a bad (noisy) reception, we recommend band switch from FM ST slide to FM position, and the FM ST indicator light turn off.

- 14 -www.jWIN.com