Random or Shuffle Play, ANTI-SKIP Memory Function

1.Press the CD Mode button till the ‘INTRO’ appear in the display.

2.The first 10 seconds of the tracks will be played once, then stops.

3.To stop the intro play and start the normal play. Press the CD Mode button twice

more or press the stop button.

Note: If you press the button during playing, it will start the intro play after the songs fin- ished.

RANDOM OR SHUFFLE PLAY

Plays all the tracks in random order.

1.Press the PLAY/PAUSE button and wait for a while.

2.Press the CD Mode button till ‘RND’ appear in the display during playing.

3.The display will show the first track the player select.

4.Press the skip button to skip the next random song.

5.To stop the function, press the CD Mode button once more or press the Stop button.

THE ANTI-SKIP MEMORY FUNCTION

The digital anti-skip function uses semiconductor memory to prevent the sound from skipping when the unit is subjected to shocks and vibration during play.

•In MP3 playing mode, the electronic anti-shock function is always functional while playing and the “ESP” appear in the display.

•In CD mode, when the ESP button is pressed during play. The “ESP” indicator ap- pears in the display and the digital anti-skip function turns on. The digital data equiva- lent to approximately 45 sec. Music is stored in a read head memory buffer before it

is decoded and played. When the unit is subjected to a shock during play, the stored data will be decoded to protect the sound stop or skip. Once the pickup returns, the new data will be read to store in the memory.

Note: The ESP/DIR NEXT button has two functions. In CD playing mode, the button is ESP button. In MP3 playing mode, it is DIR NEXT button.

CONNECTING TO HOME STEREO SYSTEMS

The line out jack is made to accept a stereo mini plug (3.5mm). By using a commer- cially available audio line cable, simply connect the cable’s mini plug to line out jack on your player, and the other appropriate end to CD/AUX input(s) of your home stereo system.

NOTE: Always switch the power off before making any connections between the player and any other set.

NOTE: The volume control or the player become inoperable when the line out jack is used. Adjustments are made on your audio system.

CLEANING

CLEANING THE PICKUP LENS

A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. Open the CD door and clean the lens as follows:

•FINGERPRINTS ON LENS

Use a cotton swab starting in the middle and working to the outside edge, pay attention in doing this operation or the pick up lens could be damaged.

E.5