Stereo CD Player with Dual Alarm Clock Radio | V11M11_IM_EN_10102007 |
TROUBLESHOOTING GUIDE / SPECIFICATIONS
When the instructions in this manual are followed, this unit should function properly. However, if any of the following difficulties occur and cannot be corrected by the user or if a problem arises that is not mentioned here, please contact jWIN Customer Service or a qualified service technician.
1.Unit Does Not Play
•Unit may be disconnected from power source. Check connection.
•Disc is not correctly set. CDs should be inserted label side up.
•Disc is scratched or dirty. Please clean.
•The lens is dirty. Wipe clean gently with soft, dry cloth. Follow the instructions of the lens cleaner.
•There is moisture on the lens wait an hour and try again.
•For CD playback, FM/AM/CD Switch must be in the CD position.
•Improper disc may be inserted. This unit does not play MP3 or WMA discs.
2.No Sound, Distorted Sound or Feedback
•Disc is scratched or dirty. Please clean.
•Volume control is turned down. Please increase.
•The unit may be located where there is vibration. Move unit if necessary.
3.Radio Reception is Unclear
•Radio station frequency may be weak. Adjust antenna or move near a window.
4.Alarm does not function
•The ON/OFF/AUTO/BUZZ Switch may not be set in proper position. Set to AUTO or BUZZ.
•Alarm function may not be set. Ensure that ALARM 1, ALARM 2, or ALARM 1+2 icons appear on the LCD screen.
5.“No” appears on screen even with CD inserted
•Disc may be improperly inserted. Ensure that it is placed in the CD compartment with the label side facing up.
Specifications
•Frequency Range
o AM: 530kHz – 1710kHz
o FM: 87.5MHz – 108MHz
•Power Requirement o AC 120V, 60Hz
o Battery: 9V battery for clock backup (battery not included)
•Power Consumption: as low as possible
General description
Power source: | AC 230V ~ 50Hz |
Output power: | 1 W / channel ????? |
* Specifications and features are subject to change without prior notice.
- 14 -www.jWIN.com