english
Wireless Connection using a router or an access point
Internet | Internet |
| Computer |
KiSS | KiSS |
| Computer |
Wireless |
|
Router | Wireless |
| Router |
Equipment required
•A wireless router with a
•A Windows PC or a Macintosh with a wireless card. The Computer can also be connected to the wireless router via Ethernet (wired).
•KiSS
1Connect the Computer to the router’s
2Check that your Internet connection is working. If any problems occur, contact your ISP (Internet Service provider).
3Install KiSS
4Start the player, press SETUP on your remote and go to NETWORK SETTINGS. Check that WIRELESS is selected under NETWORK INTERFACE and that
AUTOMATIC CONFIGURATION (DHCP) is ENABLED. Configure your wireless connection following the “Setting up a Wireless Network” instruction on the previous page. When done, press SETUP to exit this menu.
5Press MENU and go to
6Press SELECT HOST, the name of the server should appear on your screen, press OK to select it.
7Choose between AUDIO FILES, VIDEO FILES or PICTURE FILES. The player will display the list of files available from your Computer.
8If you have any problems please check the FAQ on our web site for any questions If that doesn’t help then contact the KiSS Hotline.
Your player should now be connected.
Wireless Network with a Computer using Internet connection sharing
Internet | Internet |
KiSS | KiSS |
PC | PC |
Equipment required
•A Windows PC or a Macintosh with a wireless card. The Computer can also be connected to the wireless router via Ethernet (wired).
•KiSS
1Connect the PC to the Internet (LAN/Modem/ADSL). This can be done wirelessly or wired.
2Check that your Internet connection is working. If any problems occur, contact your ISP (Internet Service provider)
3a On the Windows PC select Network Connection in Control Panel. Open Properties for the network connection that is connected to the Internet. Select Advanced where you enable Internet connection sharing.
3b On the Macintosh, go to System Preferences, select Sharing. Under sharing choose the Internet tab and click Start to enable Internet Connection Sharing.
4Install KiSS
5Start the player, press SETUP on your remote and go to NETWORK SETTINGS. Check that WIRELESS is selected under NETWORK INTERFACE and that
AUTOMATIC CONFIGURATION (DHCP) is ENABLED. Configure your wireless connection following the “Setting up a Wireless Network” instruction on the previous page. When done, press SETUP to exit this menu.
6Press MENU and go to
7Press SELECT HOST, the name of the server should appear on your screen, press OK to select it.
8Choose between AUDIO FILES, VIDEO FILES or PICTURE FILES. The player will display the list of files available from your Computer.
9If you have any problems please check the FAQ on our web site for any questions If that doesn’t help then contact the KiSS Hotline
Your player should now be connected.
Possible errors.
-Cable problem, check that there is light in all the ports of the switch/hub
-There is a firewall installed on the Computer which blocks the ports used by KiSS
-The player and the Computer are not on the same Subnet (problem with playing video)
-Your Computer has been assigned a new IP address from the DHCP server. It may differ from the one entered in the player. (Using a static IP on the Computer will counter this) - KiSS
12