Haier HW-09CV03, HW-12CV03 manual Installation instruction, Selection of the installation position

Page 12

Installation instruction

Selection of the installation position

1.Select position where the structure is firm.

2.Select position where the air inlet and outlet are smooth without obstacles.

3.Select position where the cooled air can be blown to every corner.

4.Select position where there's no direct sunlight. If the sunlight is inevitable, sun shading device is required.

5.Select position where the outdoor airflow will not influence the neighbors.

6.Select position where the drainage is smooth.

7.Select position where there's no dangerous gas or oil smoke nearby.

8.An extension cord is not recommended.

Installation diagram

It should be installed like this: the back side (outdoor side) is lower so that the drained water can flow out smoothly.

Width of the wall should be less than 295mm

5 ~ 10mm

>400mm

>400mm

>400mm

>700mm

Requirements on electricity

Be sure to use specific power circuit.

The enclosed accessories of the conditioner are:

Name

Manual

Water outlet pipe

Seal ring

Figure

Quantity

1

1

1

10

Image 12
Contents HW-09CV03 HW-12CV03 Contents Parts Name Operation Guide Operation panelHint Cool Maintenance Removal of air filterDisposal of condensate No entrance Baby has Gone sleep had better adjust suitable temp Trouble Shooting Installation instruction Selection of the installation positionIron support Cooling Wiring Diagram

HW-12CV03, HW-09CV03 specifications

The Haier HW-12CV03 and HW-09CV03 are prominent models in Haier's line of energy-efficient and advanced air conditioning units. These models are designed to provide effective cooling while ensuring user convenience, making them ideal for both residential and commercial spaces.

One of the standout features of the Haier HW-12CV03 and HW-09CV03 is their inverter technology. This technology allows for a more consistent temperature by varying the compressor speed based on the cooling demand. As a result, these units achieve quicker cooling times and save on energy bills, compared to traditional non-inverter models.

Another innovation is the Eco-Friendly Refrigerant R32, which is used in both models. R32 is known for its low global warming potential, contributing to a more sustainable environment without compromising on performance. This refrigerant enhances the overall efficiency of the air conditioning units, aligning with modern environmental standards.

The Haier HW-12CV03 and HW-09CV03 models also feature a multi-functional remote control system. This allows users to effortlessly set their desired temperature, mode, and fan speed from across the room, providing convenience and ease of operation. Additionally, a programmable timer feature is included, enabling users to set operating hours that fit their schedule, thus further optimizing energy consumption.

Both units come equipped with a high-performance air filter that captures dust, allergens, and other pollutants, ensuring that the air circulated within a room remains clean and healthy. The systems also support a self-cleaning function, whereby the indoor unit dries itself automatically to prevent mold and bacteria buildup, enhancing indoor air quality.

Durability is another highlight of the Haier HW-12CV03 and HW-09CV03 models. They are designed to withstand various environmental conditions, making them suitable for diverse climates. The stylish and modern design of these units not only complements any interior décor but also provides ease of installation.

Overall, the Haier HW-12CV03 and HW-09CV03 blend advanced technology with user-friendly features, making them among the best choices for efficient cooling solutions. Their inverter technology, eco-friendly refrigerant, air filtration, and robust design result in a balance of performance, comfort, and sustainability, catering to the modern consumer's needs.