Haier AU222XFERA, AU182XFERA installation manual Purging method to use vacuum pump

Page 12

Purging method: to use vacuum pump

1 .Detach the service portis cap of 3-way valve, the valve rod's cap for 2-way valve and 3-way valves, connect the service port into the projection of charge hose (low) for gaugemanifold. Then connect the projection of charge hose (center) for gaugemanifold into vacuum pump.

2 .Open the handle at low in gaugemanifold, operate vacuum pump. If the scale-moves of gause (low) reach vacuum condition in a moment, check 1 again.

3 .Vacuumize for over 15min. And check the level gauge which should read -0.1MPa (-76 cm Hg) at low pressure side. After the completion of vacuumizing, close the handle 'Lo' in the vacuum pump. Check the condition of the scale and hold it for 1-2min. If the scale-moves back in spite of tightening, make flaring work again, then return to the beginning of 3 .

4 .Open the valve rod for the 2-way valve to and an angle of anticlockwise 90 degree. After 6 seconds, close the 2- way valve and make the inspection of gas leakge.

5 .No gas leakage?

In case of gas leakage, tighten

 

parts of pipe connection. If

 

leakage stops, then proceed 6

 

steps.

6 .Detach the charge hose from the service port, open 2- way valve and 3-way. Turn the valve rod anticlockwise until hitting lightly.

7 .To prevent the gas leakage, turn the service ports cap, the valve rodis cap for 2-way valve and 3-way's a little more than the point where the torque increases suddenly.

Liquid stop valve

 

Gas stop valve

2 way valve

 

3 way valve

Gauge maifold(R410A)

 

 

Vacuum pump(R410A)

Open

Close

2 way valve

3 way valve 900

Service port

900 for 6 sec.

If it does not stop gas leakage, discharge whole refrigerants from the service port. After flaring work again and vacuumize, fill up prescribed refrigerant from the gas

cylinder.

2 way valve

6 3 way valve

6

2 way valve

3 way valve

Valve rod cap

Valve rod cap Service port cap

CAUTION:

If the refrigerant of the air conditioner leaks, it is necessary to make all the refrigerant out. Vacuumize first, then charge the liquid refrigerant into air conditioner according to the amount marked on the name plate.

2 way valve

3 way valve

2 way valve

3 way valve

2 way valve

90o

10s

3 way valve

6.35mm To indoor unit A (1/4")

9.52mm (3/8")

6.35mm To indoor unit B (1/4")

9.52mm (3/8")

6.35mm

To indoor unit C

(1/4")

 

9.52mm (3/8")

10

Image 12
Contents Outdoor Unit Installation Manual Contents Disposal of the old air conditioner Specifications Safety precautions Installation accessories Choose the installation placeInstallation dimensionsmm Installation drawings of indoor and outdoor units Power source Limitations on the installationStandard Maximum Refrigerant piping work Too outside Purging method to use vacuum pump Wiring work Correct Pressing Wrong Pressing Terminal Block ClampsWiring work 20A Test running Items to confirmTrouble shooting ShootingHaier Group

AU182XFERA, AU222XFERA specifications

The Haier AU222XFERA and AU182XFERA are among the most cutting-edge air conditioning units in the market, built to provide optimal comfort and efficient energy usage in residential and commercial spaces.

One of the most notable features of the Haier AU222XFERA and AU182XFERA is their inverter technology. This innovative system allows the units to adjust their cooling and heating output based on the ambient temperature, ensuring a consistently comfortable environment while minimizing energy consumption. As a result, users can enjoy lower electricity bills without sacrificing performance.

These models boast a sleek and modern design, making them aesthetically pleasing additions to any room. Their compact size allows for flexible installation options, whether wall-mounted or positioned in a designated area. This versatility enhances the appeal for various environments, from small apartments to larger office complexes.

Both models come equipped with advanced air purification systems. The built-in filters capture dust, pollutants, and allergens, ensuring that the air circulated within the space is clean and healthy. Additionally, the units feature a self-cleaning function that automatically removes dirt and mold buildup from the evaporator, further enhancing indoor air quality and reducing maintenance needs.

Another key feature of the Haier AU222XFERA and AU182XFERA is their quiet operation. Engineered with noise-reduction technology, these air conditioners operate at low decibel levels, allowing users to enjoy a peaceful atmosphere without disruptive sounds typically associated with air conditioning units.

Moreover, these models are equipped with smart technology, enabling remote control through mobile devices. Users can adjust settings, monitor energy usage, and even schedule operation times, providing convenience and enhanced control over their indoor climate.

Energy efficiency is a hallmark of Haier products, and these models are no exception. They meet or exceed stringent energy efficiency standards, making them environmentally friendly choices.

Whether cooling a sweltering summer afternoon or providing warmth during winter nights, the Haier AU222XFERA and AU182XFERA stand out for their comprehensive features, advanced technologies, and user-centric characteristics. They embody a commitment to quality and innovation, ensuring that users receive the best in indoor climate control.