INSIDE THIS INSTRUCTION MANUAL |
|
Important Safety Instructions / Specifications | 2 |
Important Information | 3 |
Amplifier Descriptions | 4 |
Contact Information | 8 |
IMPORTANT SAFETY INFORMATION |
|
1)Read these instructions.
2)Follow all instructions
3)Keep these instructions
4)Heed all warnings
5)Do not use the MATRIX 1000 near water. Be extra cautious when moving the system during rain or while transporting the system over wet surfaces as water might splash onto the amplifier.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
8)Do not install near heat sources such as radiators, stoves or other devices that may produce heat.
9)Do not defeat the safety purpose of the polarization or
10)Protect the power cord from being walked on or pinched, particularly at the plug and the point where it exits the MATRIX 1000 amplifier.
11)Only use attachments / accessories specified by
12)Use caution when transporting the system to avoid injury from
13)Unplug the MATRIX 1000 during lightning storms and when not in use.
14)Refer all servicing to qualified to personnel. Servicing is required when the MATRIX 1000 has been damaged in any way such as when
15)To reduce the risk of fire or electric shock, do not expose the MATRIX 1000 to rain or moisture.
16)The MATRIX 1000 is not intended for outdoor fixed installations or in high moisture areas. Moisture can damage the speakers and can use cause corrosion of electrical contacts.
Keep speakers out of extended or intense direct sunlight. The subwoofer spider and surround will prematurely dry out and finished surfaces may fade and be damaged by long- term exposure to intense
| HEED ALL WARNINGS |
| |
CAUTION | WARNING: To reduce the risk or fire or | ||
electrical shock do not expose | this | ||
RISK OF ELECTRIC SHOCK | |||
equipment to rain or moisture. |
| ||
DO NOT OPEN |
|
AMPLIFIER SPECIFICATIONS: |
|
Subwoofer Power Output: | 400 W / 8 Ohms @ 1% THD |
10” | 150 W / 4 Ohms @ 1% THD |
Line in: | XLR Female |
Parallel out: | XLR Male |
Input Impedance: | 48 k Ohms |
Speaker Out: | Speakon NL4 Style Connector |
ACTIVE CROSSOVER: |
|
Crossover Frequency: | 120 Hz; 24 dB/ Octave |
SUBWOOFER: |
|
Speaker: | 1 x 15” Custom Built |
Nominal Impedance: | 8 Ohms |
Subwoofer Freq. Response: | 40 Hz – 120 Hz +/- 3dB |
Sound Pressure Level (1w/1m): | 102 dB (half space) |
Max. SPL: | 127 dB @10% THD |
Weight: | 115 lbs |
Dimensions (Transport): | 28” (H) x 19” (W) x 23” (D) |
10” |
|
Speaker Input: | Speakon style connector |
| (pin 1+ = +, pin 1- = |
LF/MF Woofer: | 1 x 10” Custom Built |
HF Driver: | 1 x 3/4” Titanium Diaphragm |
| on CD Horn |
HF Dispersion: | 90O x 40O |
Nominal Impedance: | 4 Ohms |
Active Freq. Response: | 120 – 19K Hz +/- 3dB |
Crossover Frequency (passive): | 2.5 kHz; 12 dB / Octave |
Sound Pressure Level (1w/1m): | 101 dB (half space) |
Max. SPL: | 124 dB @10% THD |
Weight: | 25 lbs |
Dimensions (Upright): | 19” (H) x 12” (W) x 11” (D) |
COMPLETE SYSTEM: |
|
Weight: | 165 lbs |
Dimensions (Transport): | 39” (H) x 19” (W) x 23” (D) |
|
|
Note: Specifications are subject to change without notice
2