![](/images/new-backgrounds/1198527/19852717x1.webp)
WORKINGMAN’S 4X10T
Specifications
Description: 4x10 and Tweeter Speaker Enclosure
Power Handling: 400 watts RMS
Impedance: 8 ohms
Frequency Response & SPL:
100 dB SPL @ 1W1M
Speaker Complement:
(2)Custom Designed 10" SWR Drivers
(1)LCustom Designed Tweeter
Porting: Front Slot Port
Dimensions: 23"W x 25.25"H x 18.375"D
Weight: 97 lbs.
Connection and Operation
The SWR WorkingMan’s 4X10T speaker enclosure can be connected to any musical instrument amplifier that is capable of driving an 8 ohm load. To connect your
amplifier to the WorkingMan’s 4X10T, run a high quality speaker cable (18 gauge or heavier) from your amplifier's speaker output to the designated 1/4" speaker input on the cabinet’s input panel.
Power Handling
The power output rating for any amplifier that is connected to the WorkingMan’s 4X10T should not exceed the cabinet’s 400 watt power handling capacity. Please be aware that exceeding the power handling capacity of the WorkingMan’s 4X10T can void the SWR warranty if any damage occurs to your loudspeakers due to overpowering.
Tweeter Control Switch
(See page 3.)
Internal Crossover
The internal (passive) crossover of the WorkingMan’s 4X10T divides the incoming signal into two frequency bands. The crossover point is 5kHz (frequencies above 5kHz are sent to the tweeter, fre- quencies below 5kHz are sent to the 10" speakers).
Removable Caster Wheels
The WorkingMan’s 4X10T is shipped with a set of four,
Workingman’s Series Bass Speaker Enclosures • 8