Symptom Possible Problem Solution | Altec Lansing im500 manual

Symptom	Possible Problem	Solution
The Power LED is	No batteries are installed.	Install six AAA (LR03) batteries (not included) into the battery compartments in
not lit (Battery		the rear of the inMotion iM500 (three to each compartment). Make sure the
Operation).		batteries are installed as illustrated in the battery compartments.

	The power isn’t turned on.	Turn on the inMotion iM500 by pushing the power button located to the right
		of the iPod dock. A blue LED will light around the button when the power
		is on.

No sound is	The volume is set too low.	The “+” and “–” buttons located to the right of the iPod dock control the
coming from		master volume. Press and hold the “+” button to increase the volume.
speakers.
speakers.		Check the volume level on alternate audio source device and set at mid-level.


	The iPod nano is not correctly seated into the docking	Turn off the iPod nano, remove it from the docking station, reseat it, and turn
	station.	it on again.

	If using an alternate audio source, the audio source is	• Connect an alternate audio source — such as non-dockable iPod players, CD
	not properly connected to the inMotion iM500 or there	players, MP3 players, portable DVD players, and laptops — to your inMotion
	is a problem with the alternate audio source.	iM500 by connecting the small end (2.5mm) of the cable adapter to the
		auxiliary input jack (AUX) located on the back of the inMotion iM500 system,
		and the larger end (3.5mm) to the headphone or line out jack on your
		alternate audio device.
		• Set the volume on the audio source at mid-level.
		• Set the volume on the inMotion iM500 at minimum level and adjust upward
		to a comfortable listening level.

There is a	The iPod nano is not correctly seated into the docking	Turn off the iPod nano, remove it from the docking station, reseat it, and turn
crackling sound	station.	it on again.
coming from
coming from		• Connect an alternate audio source — such as non-dockable iPod players, CD
speakers.	If using an alternate audio source, the audio source is
	not properly connected to the inMotion iM500 or there	players, MP3 players, portable DVD players, and laptops — to your inMotion
	is a problem with the alternate audio source.	iM500 by connecting the small end (2.5mm) of the cable adapter to the
		auxiliary input jack (AUX) located on the back of the inMotion iM500 system,
		and the larger end (3.5mm) to the headphone or line out jack on your
		alternate audio device.
		• Set the volume on the audio source at mid-level.
		• Set the volume on the inMotion iM500 at minimum level and adjust upward
		to a comfortable listening level.

There is a	The operating system’s volume level is set too high.	Check the operating system volume level and decrease it if necessary.
crackling sound
coming from
speakers (when
connected to PC
or laptop).

The sound	The inMotion iM500’s volume level is set too high.	The “+” and “–” buttons located to the right of the iPod dock control the
is distorted.		master volume. Press and hold the “–” button to decrease the volume.

There is radio	The unit is too close to a radio tower.	Move the unit to see if the interference goes away.
interference.

Intermittent	The unit is located too close to a GSM cell phone.	Move the GSM cell phone away from the unit.
buzzing.

im500 specifications

The Altec Lansing IM500 is a portable Bluetooth speaker that combines impressive sound quality with a stylish design, making it a popular choice among music enthusiasts. This compact speaker is packed with features that enhance the listening experience while providing convenience and portability.

One of the standout features of the IM500 is its advanced Bluetooth technology, which allows for easy wireless connectivity with a range of devices, including smartphones, tablets, and laptops. This enables users to stream their favorite music, podcasts, or audiobooks without the hassle of tangled wires. The IM500 supports a robust Bluetooth range, typically up to 100 feet, ensuring that users can enjoy their tunes from a distance without losing connection.

The IM500 is designed with high-quality audio performance in mind. Its built-in drivers deliver crisp highs and rich lows, providing a well-rounded sound experience that suits various musical genres. The speaker also employs Altec Lansing's proprietary technologies to enhance sound clarity and boost bass response, enabling users to enjoy full-bodied audio whether they're indoors or outdoors.

Portability is a key characteristic of the IM500. Its compact size makes it easy to carry in a backpack or purse, and its lightweight design ensures that it won't weigh you down during travels. Additionally, the speaker is equipped with a built-in rechargeable battery, which provides several hours of playtime on a single charge, allowing users to take their music on the go without worrying about finding a power source.

In terms of durability, the IM500 boasts a rugged construction, making it suitable for outdoor use. Some models even feature water resistance, protecting the speaker from splashes and light rain, making it ideal for pool parties or beach outings.

Another notable characteristic of the IM500 is its user-friendly interface. The speaker typically has simple control buttons for play, pause, volume adjustment, and track skipping, allowing users to manage their music easily. Additionally, it often includes a built-in microphone for hands-free calls, adding to its versatility.

Overall, the Altec Lansing IM500 is a well-rounded portable Bluetooth speaker that offers impressive sound quality, convenience, and durability. Whether you're on a hike, at a picnic, or just relaxing at home, this speaker is designed to deliver an enjoyable audio experience wherever you are.