Troubleshooting

Caution

CAUTION

	Symptom		Items to Check

	Buttons do not work.		Is the power turned on?

	No sound		Is the audio which is connected with
			the audio cable set to receive
			the DVD signal output?
			Is audio cable connected securely?
			Is the monitor which is connected
			with the audio cable turned on?
			Is the audio output set
			in the correct position?

	Remote control does		Is the remote control facing
	not work properly.		the remote sensor?
			Is the distance too far?
			Is there any obstacle in the middle?
			Is the battery weak?

Actions to be Taken

Check the car battery capacity.

Select the correct input mode for the audio receiver. Connect the audio cable into the jacks securely. Turn on the monitor connected with the audio cable.

Set the Audio Output to the correct position,

and then turn on the DVD player again by pressing the POWER button.

Point the remote control toward the remote sensor of the product.

Use the remote control within 15 feet.

Remove the obstacle.

Replace with new battery.

Quality installations are best performed by qualified and certified installers.

，

Don t touch the unit if there is a flash of lightning. You may receive an electric shock.

Do not cover or stop up heater ducts or vents. It may cause a fire or receive an electric shock.

Watching the monitor for an extended period of time without the engine running

，

may deplete the vehicle s battery charge.

This product is designed for operation with a 12 Volt DC, negative ground vehicle. It is not suitable for operation under other conditions or voltages.

Do not bring magnetic devices such as credit card or magnetic card near the magnets.

Moisture or condensation on lens

When a disc is brought from a cold environment to a warm one, there may be moisture on the the disc, or condensation on the pickup lens. It will affect disc playback.

1.Remove the disc from the DVD player.

2.Turn on the power and leave it on for an hour to vaporize the condensation.

Operating Notes

1.The operating temperature of this product is limited to 14 ~+140 F.

2.If your vehicle is extremely hot or cold you must allow time for your air conditioner or heater to cool or heat the vehicle until operating temperatures have returned to normal operating ranges.

3.Optimal picture quality is achieved when viewed from directly front of the monitor (+/-30degrees).

4.Do not open the housing and attempt to make any repairs yourself. Refer servicing to qualified personnel.

5.DVD Players use an invisible laser beam which can cause hazardous radiation exposure. Be sure to operate the unit correctly as instructed.

6.Do not cut the car power supply off while a disc is playing. It can cause damage to the DVD Player.

7.If the buttons get stuck, please try to press the up of buttons, it will get back. It won't impact using normal.

8.If you cann't find the files name in list when playing, please reset units or turn off/on over again.

9.If the unit cann't be change mode when playing some special files which the unit didn't support, please reset units or turn off/on over again.

VCM-11DXX specifications

Soundstream Technologies has made a significant mark in the audio and car electronics industry, and the VCM-11DXX is a stellar representation of their innovative spirit. This high-performance amplifier is designed for enthusiasts who seek premium sound quality and powerful output in their vehicle audio systems.

One of the standout features of the VCM-11DXX is its impressive power output. With a robust 2000 watts RMS, it delivers an exhilarating audio experience, allowing users to enjoy deep bass and crystal-clear highs even at elevated volumes. This amplifier is equipped with a Class D architecture, which not only enhances efficiency but also minimizes heat generation, ensuring reliable performance during extended listening sessions.

The VCM-11DXX boasts advanced circuitry that minimizes distortion and optimizes sound clarity. This is particularly important for audiophiles who demand high fidelity audio reproduction. The high-pass and low-pass filters included in the design allow users to customize their sound experience, making it easier to integrate with various speaker configurations.

Another remarkable feature of the VCM-11DXX is its versatility. It can support both 2-ohm and 4-ohm loads, making it capable of driving a wide range of speakers. This flexibility means that users can create their ideal sound system without worrying about compatibility issues.

The build quality of the VCM-11DXX is another aspect that deserves mention. Encased in a sturdy chassis, it is designed to withstand the rigors of automotive environments while remaining aesthetically pleasing. With its sleek design, it can easily blend into various automotive interiors without being an eyesore.

Moreover, Soundstream Technologies has incorporated various protection circuits into the VCM-11DXX. Features such as thermal protection, overcurrent protection, and short circuit protection ensure longevity and reliability, providing peace of mind to users who push their audio systems to the limit.

In summary, the Soundstream Technologies VCM-11DXX is a feature-rich amplifier that appeals to both casual listeners and serious audiophiles. With its high power output, advanced sound processing capabilities, and robust design, it sets a new standard in automotive audio performance. Whether building a new system or upgrading an existing one, the VCM-11DXX stands out as an excellent choice for anyone looking to elevate their in-car listening experience.