Features

SPL 45 Midrange / Woofer

The SPL 45 is an excellent performer with a combination of high sensitivity, solid bass and smooth response throughout the audible range.

∙Lightweight Cone designed for good rigidity and high sensitivity

∙2 Ohm Voice Coil for increased voltage sensitivity and higher output

The SPL 45's coaxially mounted tweeter is a high performance 13mm Neodymium tweeter designed to deliver outstanding high frequency reproduction.

∙13mm Polyimide dome for improved power handling and linear response

∙Ferrofluid-immersed Voice Coil enhances heat dissipation

∙Vented Aluminum Voice Coil Former for superb heat dissipation and high power handling

∙The crossover consists of high quality, 2 pole design for improved power handling, lower distortion and better imaging

∙Acoustic Summation design combines the crossover with the speaker's natural roll-off for a steeper slope and increased power

∙Dynamic tweeter protection allows for improved power handling and continuous output

The 2 Ohm impedance design of the SPL 45 system provides an overall 3 dB increase in output compared to a 4 Ohm design.

∙Effectively a doubling of Sound Pressure Level -- with the same voltage input

∙More stable, phase coherent load than two 4 Ohm speakers

45.pub	Friday, September 10, 1999 21:04
page 3