Haier 0010573573 operation manual Requirements, Insulation treatment

Page 19

Installation Procedure

! Caution

In order to drain water normally, the drain pipe shall be processed as specified in the installation manual and shall be thermal insulated to avoid dew generation. Improper hose connection may cause indoor water leakage.

Requirements

The indoor drain pipe shall be thermal insulated.

The connection part between the drain pipe and the indoor unit shall be insulated so as to prevent dew generation.

The drain pipe shall be slant downwards (greater than 1/100). The middle part shall not be of S type elbow, otherwise abnormal sound will be produced.

The horizontal length of the drain pipe shall be less than 20 m. In case of long pipe, suppo- rts shall be provided every 1.5 ñ 2m to prevent wavy form.

Central piping shall be laid out according to the following figure.

Take care not to apply external force onto the drain pipe connection part.

1.5m~2m

 

Support

 

Insulation

Down slope

S type elbow

(supplied by the user)

above 1/100

 

To the largest (app. 10cm)

Wall

Outside

VP30

Down slope above 1/100

Pipe and insulation material

Slant

Drain pipe (supplied by the user)

Pipe

Rigid PVC pipe VP31.5mm (internal diameter)

 

 

Insulation

Foamed PE with thickness above 7mm

Hose

Drain pipe size: ÿ 19.05mm2 (3/4") PVC pipe

The hose is used for adjusting the off-center and angle of the rigid PVC pipe.

Directly stretch the hose to install without making any deformation. The soft end of the hose must be fastened with a hose clamp.

Please apply the hose on horizontal part

Hose

Hose clamp

Insulation treatment:

Wrap the hose and its clamp until to the indoor unit without any clearance with insulating material, as shown in the figure.

Drain confirmation

Subsidiary insulation

Insulation

Rigid PVC pipe

 

 

During trial run, check that there is no leakage at the pipe connection part during water draining even in winter.

17

Image 19
Contents Operation & Installation Manual Table of Contents Page Page Page Risk of electric shock Important Points of SafetyImportant Points of Safety Important Points of Safety Following cases are not troubles Trouble ShootingSystem couldnt start Is power on/off switched on? Poor cooling or heating When Fault OccursPoor cooling Information about application Installation Precautions Installing tools Figure showing installation dimensions unitmm Installation ProcedureAir outlet grille Air supply Transitive air duct New concrete slab Insulation treatment RequirementsRequirement Pipe expansion dimensions as followsPipe cutting and expanding Allowable pipe length and drop Supplementary refrigerantOpen all valves Vacuum pumpingGas leakage detection

0010573573 specifications

Haier 0010573573 is a prominent model within Haier’s extensive range of appliances, particularly recognized for its innovative features and cutting-edge technologies. This model caters to consumers seeking efficiency, performance, and reliability in their daily household tasks.

One of the most notable features of the Haier 0010573573 is its energy efficiency. Designed with eco-friendliness in mind, this appliance boasts a high energy efficiency rating which not only helps in reducing electricity bills but also contributes to a sustainable environment. It utilizes advanced energy-saving technologies that minimize energy consumption without compromising performance.

Incorporating smart technology is another key characteristic of the Haier 0010573573. With Wi-Fi connectivity, users can control the appliance remotely through a dedicated mobile app. This functionality allows for real-time monitoring, scheduled operations, and notifications, making it easier for users to manage their household tasks efficiently. The smart technology integration enhances user convenience by allowing customization according to individual preferences.

The design of Haier 0010573573 emphasizes functionality and style. The sleek and modern aesthetic ensures that it complements any kitchen decor. Additionally, the appliance is built with high-quality materials that enhance its durability and longevity, ensuring it remains a staple in the household for years to come.

Haier is known for its user-friendly interfaces, and this model is no exception. The intuitive controls make it simple for users of all ages to operate, eliminating any learning curve. Moreover, safety features have been prioritized, incorporating mechanisms that prevent overheating and electrical hazards, making it a reliable choice for families.

Furthermore, the Haier 0010573573 has received positive reviews for its performance. It delivers consistent results, whether in cooling, heating, or washing, depending on the specific functions of the model. This reliable performance enhances user satisfaction and builds trust in the brand’s reputation.

In conclusion, Haier 0010573573 stands out due to its energy efficiency, smart technology features, stylish design, and robust performance capabilities. It is an excellent investment for consumers looking for a dependable appliance that seamlessly integrates into their modern lifestyle.