CONNECTING THE SYSTEM TO YOUR AV RECEIVER
Wire up the system connecting each speaker to the appropriate terminals on the receiver or amplifier making sure that cables connect red to red terminals (+ to +) and black to black terminals (- to - ).
Please note : (+) is shown as grey,
Take care to distinguish between left and right channels and the front and rear channels, as seen from the viewing position.
This is a very important stage in setting up. Getting things wrong at this stage is the most likely reason for disappointing results.
Front Right | Front Left |
Centre
Rear Right
F/R
R/R
C
SUB
F/L
R/L
Rear Left
Subwoofer
(+)
16