TOA Electronics F-2000B, F-2000WT Wall and pole 0º horizontal to 45º downward, Terminal Cover Use

Page 6

7.NOTES ON OUTDOOR INSTALLATION (F-2000BTWP and F-2000WTWP only)

•Be sure to mount the speaker in a vertical (portrait-style) orientation.

•Adjust the speaker's tilt angle within the shaded range shown below:

[Wall and pole: 0º horizontal to 45º downward]

Note

Mount the speaker so that its rear-mounted terminal cover is positioned on the upper side.

0º

(horizontal)

45°

[Under eaves: 15º downward to 45º downward]

Note The speaker faces 15° downward when mounting

to a horizontal surface.

15° 0°

(horizontal)

(30°)

45°

•Install the speaker in locations exposed to an ambient temperature range of –10ºC to +50ºC. Exceeding this range could cause speaker failure.

•Use the supplied terminal cover when connecting the speaker cable.

[Terminal Cover Use]

3

2

Terminal cover (accessory)

 

 

Tapping screw 4 x 12 (accessory)

4 Bushing*

1

Speaker cable

Input terminal

[Stripped conductor]

10 mm

30 mm

Speaker unit

* Screwed onto the Terminal cover at the factory.

Notes

•For the speaker cable, use a cable with a diameter of 6 – 10 mm, which will fit the cable bushing.

•To ensure waterproof capabilities, firmly mount the terminal cover to the speaker and tighten the bushing on the cover.

Step 1. Feed the speaker cable through the bushing and terminal cover, then connect the cable to the input terminal.

Step 2. Attach the terminal cover to the speaker.

Attach the cover while pulling the cable so that it is not entangled inside the terminal cover.

Step 3. Hold the terminal cover tightly to the speaker using the supplied screws.

Step 4. Tighten the bushing.

Note

After tightening the bushing by hand, use a tool to further tighten it another 90º (1/4-turn) or so. Note that parts can be damaged by over-tightening.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Speaker Systems Operating InstructionsTable of Contents When Installing the Unit Safety PrecautionsSafety Symbol and Message Conventions When the Unit is in UseFeatures Dimensional DiagramGeneral Description About the Input Overload Protection Circuitry 2000B and F-2000W onlyWall and pole 0º horizontal to 45º downward Under eaves 15º downward to 45º downwardTerminal Cover Use Installation Using the Supplied BracketsSpeaker Cable Connections When adjusting horizontal and vertical angles Wall MountingArrow label orientation Viewed from top of brackets Changing the orientation of the front panel logo Mounting the speaker close to a wall surfaceCeiling Mounting Vertical orientationMount the joint bracket to the ceiling surface Installation example Speaker Stand Mounting Pole Mounting F-2000BTWP and F-2000WTWP only Speaker bracket mounting positionPole SP-131 Wall bracket Reducing the Speaker Coverage Angle Attaching the horn adapterRepainting the Speaker Detaching the mesh grillSpecifications 11.1. F-2000B and F-2000W11.2. F-2000BT and F-2000WT 11.3. F-2000BTWP and F-2000WTWP IPX4

F-2000BT, F-2000B, F-2000WTWP, F-2000WT, F-2000W specifications

TOA Electronics has established itself as a leader in professional audio equipment, and its range of F-2000 series loudspeakers is a testament to the company’s commitment to innovation and quality. The F-2000BTWP, F-2000W, F-2000WT, F-2000WTWP, and F-2000B models are engineered to deliver superior sound performance and versatility for various applications, from public announcement systems to immersive audio in performance spaces.

One of the standout features of the F-2000 series is its exceptional audio clarity. Each model incorporates TOA's advanced acoustic design, featuring high-quality drivers that produce a balanced frequency response and high-output capabilities. This ensures clear intelligibility, making them suitable for environments such as schools, auditoriums, and conference rooms.

The F-2000BTWP model, equipped with Bluetooth technology, adds a layer of convenience, allowing users to stream audio wirelessly. This feature enhances its usability in diverse settings where wired connections are impractical. The careful engineering of the Bluetooth module ensures minimal latency, so users can enjoy seamless audio playback for presentations or music.

For installations requiring weather-resistant solutions, the F-2000WTWP offers specific enhancements to withstand outdoor conditions, ensuring durability and longevity. This flexibility makes it a popular choice for outdoor events or venues where environmental factors are a concern.

The range also emphasizes versatility in mounting and positioning. The F-2000W and F-2000B models come with multiple mounting options, allowing for easy integration into existing setups. Their compact form factor ensures they can fit into various spaces without compromising on sound quality.

The F-2000WT model stands out with its enhanced wide dispersion capabilities, which allow for consistent sound coverage, making it ideal for larger venues. Combined with TOA's proprietary technology, you can achieve optimal sound distribution, ensuring that every audience member has a premium listening experience.

All of these speakers are designed with aesthetics in mind, featuring sleek and unobtrusive designs that blend seamlessly into any environment. This combination of technology, flexibility, and design makes the TOA Electronics F-2000 series a reliable choice for audio professionals seeking high-performance and adaptable sound solutions. Whether for indoor or outdoor application, these speakers exemplify the quality and innovation that TOA is known for.
Top Page Image Contents