Specifications
Electrical | 120 V~ / 60 Hz |
Requirements | |
Heat Range | LO: 1000W / HI: 1500W |
| Off |
Settings | Adjustable Heat levels: Low/High |
| Heat: Min/Max |
HOUSEHOLD USE ONLY
Thermostat | Power |
(5) | Switch |
| (6) |
Power Light (3)
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Operation
Read the entire RULES FOR SAFE OPERATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding parts listed, refer to Assembly Diagram at back of manual.
Figure 1
1.Make sure the Power Switch (6) is turned to Off.
2.Place Heater/Fan on a sturdy, dry surface, away from any combustible materials.
3.Plug into a 120V electrical outlet.
4.Turn the Power Switch to the LO (low) or HI (high) setting.
5.Adjust the Thermostat (5) to the desired setting between MIN (minimum) and MAX (maximum).
6.The Power Light (3) turns on when the Power Switch is set to LO or HI.
7.When finished using the Heater/Fan, turn the Power Switch to Off and unplug the unit.
Safety Feature: This unit is equipped with a thermal overload protection feature which shuts off the unit if the temperature rises above the highest setting. If the unit suddenly turns off, turn the Power Switch off, unplug the unit, wait for it to cool completely. Once the Heater has
SKU 67118 | For technical questions, please call | Page 5 |