PHL Audio B30 specifications Applications, Design Concept, Features, Architectural Specifications

4500

4510

6 Ω	B30
	PROFESSIONAL SERIES
8 Ω

12” Bass Midrange Drivers

High Efficiency

High Sounding Quality

APPLICATIONS

These models have been designed for Bass-Midrange applications in the field of Sound Reinforcement.

They can be used in two-way and three-way systems of 300W AES when high sounding quality and high efficiency are needed.

Maximum recommended X-over freq. is 2.0kHz, Optimum Bass-Reflex loading is situated between 40L and 50L tuned from 48Hz to 52Hz.

DESIGN CONCEPT

DEFLECTION CONTROLLED DIAPHRAGM optimized for dynamic damping. DEFLECTION CONTROLLED DIAPHRAGM technology consists in optimizing the shape and material of the diaphragm so that it works as a mechanical transmission line, to avoid breaking modes as well as mechanical threshold which destroy sound quality.

This leading edge technology offers substantial sonic advantages. Among them: sound coherency, fast transients, stable sound imaging, high sensitivity, wide frequency range and reduced directivity pattern.

VENTED COMPACT MAGNET SYSTEM. It has been carefully optimized to obtain maximum transducing efficiency while avoiding unlinear behavior such as coil inductance variation with position, flux modulation, harmonic distortion, rest position offset, air compression and off-axis voice-coil pushing.

Its design incorporates a T-shaped and vented pole piece, and a flux stabilization ring. It also takes into consideration demagnetization at cold temperatures.

INTERCOOLER SYSTEM (patented). Entirely integrated into the loudspeaker itself, the INTERCOOLER SYSTEM extracts the heat produced by Joule effect in the voice-coil by the means of an air flow directed through the heatsink rims of the basket by the motion of the dust-cap and the spider.

The gain brought about by this technology is over 20 % of extra power, so for example, a 3”coil according to this design has the same power handling capacity as a classical 4”one.

FEATURES

Power handling capacity 300 W AES Reference efficiency(1W @ 1m) 96 dB SPL

SPL max (continuous)	117 dB SPL
Usable frequency range	40-2000 Hz

Environmental withstanding Outdoor

ARCHITECTURAL SPECIFICATIONS

NOMINAL DIAMETER : 300 mm.

FRAME : High tensile alloy pressure die-cast basket with patented

INTERCOOLER SYSTEM.

MAGNET SYSTEM : 2.5”highly energized, heat extracting design with vented pole piece and flux stabilizing ring.

VOICE COIL : High-temperature stabilized copper wire wound on high-strength glass polyimide former.

CONE ASSEMBLY : High-strength cellulose fiber cone and central dome impregnated and front cated with damped resins, fitted with high-compliance treated double-roll fabric surround.

SPEAKER MASS : 6.40 kg.