Plantronics 620 manual Initial Pairing, USB Adapter

Page 9

Pairing

Initial Pairing

Your Bluetooth USB adapter comes pre-paired to your Speakerphone.

 

NOTE The Bluetooth USB adapter is only for use with the Calisto 620 and is not for use with other

 

Bluetooth devices. The Calisto 620 Bluetooth USB adapter is marked with a graphical identifier.

To Re-pair your Bluetooth

In the event that your speakerphone and Bluetooth USB adapter are not paired or become

USB Adapter

unpaired do the following:

1

Start with the speakerphone powered off.

2

 

 

 

 

Remove the Bluetooth USB adapter.

3Place the Speakerphone in pairing mode by pressing and holding the power switch to the RIGHT until the Bluetooth pairing LED flashes BLUE / RED

4Insert the Bluetooth USB adapter directly into your PC USB port. The LED will flash and then turn solid blue to indicate the speakerphone is connected to the Bluetooth USB adapter

5Speakerphone will exit pairing mode.

Reconnect The Bluetooth USB adapter and the speakerphone will automatically reconnect the speakerphone to mobile phone and PC when speakerphone is turned off and then back on and within range of devices.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Calisto Contents Welcome Calisto 620 highlights and featuresSystem Requirements ComputerWhats in the box Basics Bluetooth USB AdapterSpeakerphone Speakerphone Pairing LED Volume Up/Volume Down Buttons Power LED Speakerphone ControlsCharge your Speakerphone Battery Charging StatusBattery Level Red LED Flashes Low Battery WarningsPairing Initial PairingUSB Adapter Connect PC and Call WindowsWindows XP Pair Mobile Phone and Call Features Advanced FeaturesPlay/Pause For Best Results Important Tips for Using your SpeakerphoneDevices Tab Applications Tab Plantronics Spokes SoftwareCalisto 620 Wireless Speakerphone How do I know Calisto 620 is turned on? TroubleshootingPage Area? Can I use Calisto 620 in my car? Need More HELP?
Top Page Image Contents