Troubleshooting
Troubleshooting
1. Follow Pressure Relief Procedure, page 6, before checking or repairing gun.
2. Check all possible problems and causes before dis- assembling gun.
Problem | Cause | Solution | |
|
|
| |
| Inadequate air supply pressure or | Increase air supply and/or clear | |
| restricted air lines | restriction | |
|
|
| |
| Closed or clogged valves | Open and/or clear | |
|
|
| |
Pump fails to operate | Clogged fluid lines, hoses, valves, | Relieve pressure. Clear obstruction | |
etc. | |||
|
| ||
|
|
| |
| Damaged air motor | Assess damage and service air | |
| motor | ||
|
| ||
|
|
| |
| Exhausted fluid supply | Refill and reprime or flush | |
|
|
| |
Continuous air exhaust | Worn or damaged air motor gasket | Asses wear or damage and service | |
or seal | air motor | ||
| |||
|
|
| |
| Exhausted fluid supply | Refill and reprime or flush | |
Erratic pump operation |
|
| |
Held open or worn intake valve or | Clear and service | ||
| |||
| piston packings | ||
|
| ||
|
|
| |
Pump operates, but output low on | Held open or worn piston packings | Clear and service | |
upstroke | |||
|
| ||
|
|
| |
Pump operates, but output low on | Held open or worn intake valve | Clear and service | |
downstroke | |||
|
| ||
|
|
| |
| Inadequate air supply or restricted | Increase air supply and /or clear | |
| air line | restriction | |
|
|
| |
Pump operates, but output low on | Closed or clogged valves | Open and/or clear | |
|
| ||
| Refill fluid supply and reprime pump | ||
both strokes | Exhausted fluid supply | ||
or flush | |||
| |||
|
| ||
|
|
| |
| Clogged fluid lines, hoses, valves, | Relieve pressure. Clear obstruction | |
| etc. | ||
|
| ||
|
|
|
306518ZAC | 7 |