Peavey 3X specifications Mounting, Architectural and Engineering Specifications

Page 3

Power Handling

There are many different approaches to power handling ratings. Peavey rates this loudspeaker system’s power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent upon having a minimum of 3 dB of amplifier headroom available.

Mounting

This unit is not designed for overhead suspension. SA-1 stand mount adapter

built-in, and four large rubber feet on bottom for floor use.

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 54 Hz to 17 kHz. The nominal output level shall be 99.0 dB when measured at a distance of one meter with an input of one Watt. The nominal impedance shall be 8.0 Ohms. The maximum continuous power handling be 500 Watts, maximum program power of 1,000 Watts and a peak power input of at least 2,000 Watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 45 degrees in the

SP3X INPUT

vertical plane. The outside dimensions shall be 33.63 inches high by 21.38 inches wide by 22.88 inches deep. The weight shall be 92 pounds. The loudspeaker system shall be a Peavey model SP 3X.

3 + 2 YEAR LIMITED WARRANTY

NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi 39301-2898.

Image 3
Contents Sound pressure level, 1 Watt Meter in anechoic environment Power handlingBox tuning frequency Usable low frequency limit -10 dB pointDescription Dimensions H x W x DNet weight FeaturesMounting Architectural and Engineering Specifications80304851