-. For Passive Subwoofer & Satellite Speakers
1). Connect one side of speaker cable to the Output CHA/CHB or Binding Post of your stereo power amplifier and the other
side to the Input socket of your subwoofer, with the second speaker cable connect the Output of the subwoofer to the Input of satellite.
2) Connect the input terminal of LTO MS1 with the AUX SEND of mixer ( or the similar terminal). Connect its output terminal with the AUX RETURN of the mixer. Then select the preset as need.
3). Complete other connections as illustrated.
4). Turn on your mixer and MS1 first, then the stereo power amplifier.
5). Turn up the volume controls of your amplifier to about 70%.
6). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the output level.
7). After using, turn off your stereo power amplifier first, then the mixer and Ms1.
QUICK START
MS Passive Subwoofer & Satellite Speakers
pole Mount
Speaker Cable
pole Mount
Speaker Cable | Speaker Cable |
Stereo
Power Amplifier
Left | Right |
Main Mix | Main Mix |
Output | Output |
Speaker Cable
Mixer
6