RotoFlex Pump Repair Kit
Reassembly
Reinstall RotoFlex Pump hose on plate.
1. Kink hose as shown, | DOTS | |
making sure dots | ||
| ||
located on hose fitting |
| |
face each other. |
|
ti3127a
3.Align dots located on hose fitting, making sure they are facing each other at all times to ensure the hose does not twist during reinstallation.
ti3084a
4.Reposition plate, aligning hex fittings with enclosure openings.
2.Slide hose onto plate as shown below, mak- ing sure plate slides into slot between hex fitting on end of hose.
5.Remove wood block support under motor.
6.Tighten bolt. As bolt is tightened the plate will snug
back into place.
7.Replace shroud (6 bolts).
8.Replace hopper.
9. Break in new pump by running dry or with warm water for
ti3125a
309793 A | 3 |