Martin Audio DX2 manual MARTN1RLCDLC21801.bin Binary presets for

Loading binary presets into your Martin Audio DX2

Loudspeaker Management System

Clicking here takes you to a zip folder containing the loader software and binary files. Extract these to your hard disk. Do not run the programme from the zip folder.

Warnings

Loading presets will overwrite previously loaded factory presets - and any changes to them (e.g. channel gain, delay, limiter settings).

To make a permanent record of changes to the user-editable parts of a preset, you must save the preset in one of the lower number memory locations.

Make sure you have a full set of .bin files before proceeding so that you can reload your original presets if you need to.

If you are not familiar with the Martin Audio DX2, please read the DX2 User Guide.

You should have extracted the following files to a suitable folder on your hard drive:

MartinFlashLoader.exe – The DX2 binary preset loader software

MARTN1RLCDLC21801.bin – Binary presets for

W8LCD+W8LC+WS218X/W8LS combinations

MARTN1RLCDLCWLX01.bin – Binary presets for W8LCD+W8LC+WLX combinations

MARTN1RLDLBLS02.bin – Binary presets for W8LD+W8L

Longbow+W8LS/WS218X combinations

MARTN1RLM218X03.bin – Binary presets for

W8LMD/LM+WS218S/W8LS combinations

MARTN1RLMWLX03.bin – Binary presets for W8LMD/LM+WLX combinations

MARTN1RLMWMX03.bin – Binary presets for W8LMD/LM+WMX combinations

MARTN1RLE12152101.bin – Binary presets for 4-mix LE1200, LE1500 or LE2100 systems

All material © 2007. Martin Audio Ltd. Subject to change without notice.