Technical specifications, Accessories | Martin Audio AQ10 manual

AQ10

Compact, full-range system

technical specifications

architectural and engineering specifications

architectual

TYPE	Compact, two-way passive, vented trapezoid
FREQUENCY RESPONSE (1)	65Hz-20kHz ± 3dB
DRIVERS	10" (250mm) bass driver
	1" (25mm) exit HF compression driver
RATED POWER (2)	300W AES, 1200W peak
RECOMMENDED	300-600W into 4 ohms
AMPLIFIER
SENSITIVITY (6)	96dB
MAXIMUM SPL (7)	119dB continuous, 125dB peak
NOMINAL IMPEDANCE	8 ohms
DISPERSION (-6dB)	90º horizontal, 50º vertical
CROSSOVER	2.7kHz passive
ENCLOSURE	27 litre, braced 18mm MDF
FINISH	Textured light grey paint
PROTECTIVE GRILLE	Light grey perforated steel
CONNECTORS	Low profile 20 amp push-lock
FITTINGS	6 x M8 inserts for bracket
	2 x M8 inserts for safety point
OPTIONS	150W 100/70V line transformer
DIMENSIONS	(W) 323mm x (H) 493mm x (D) 325mm
	(W) 12.7ins x (H) 19.4ins x (D) 12.8ins
WEIGHT	17kg (37lbs)

accessories

AQWB8	Wall Bracket
AQCS	Short Ceiling Bracket
AQCL	Long Ceiling Bracket
AQFB	Flying Bracket

Notes

(1)Measured on-axis in half space at 2 metres, then referred to 1 metre.

(2)AES Standard ANSI S4.26-1984.

(3)Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.

(4)Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.

(5)Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.

(6)Measured in open (4π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.

(7)Measured in open (4π) space at 2 metres using band limited pink noise, then referred to 1 metre.

Trade Descriptions Act

Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice. Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards and rigorously tested to ensure that it meets the performance criteria specified in the design.

The loudspeaker system shall be of the two-way passive type consisting of one 10" (250mm) direct radiating reflex loaded low frequency transducer and one 1" (25mm) exit HF compression driver mounted on a user rotatable constant directivity horn in a trapezoidal MDF enclosure. The enclosure shall be fitted with threaded inserts for attachment to a custom bracket. An internal 2.7kHz passive crossover network shall integrate the low and high frequency sections.

Performance of the loudspeaker system with its electronic controller shall meet or exceed the following criteria:

Frequency response measured 1 metre on axis shall be 65Hz-20kHz ±3dB.

High frequency dispersion at -6dB points shall be 90˚H x 50˚V.

Power handling shall be 300W AES, 1200W peak. Rated impedance shall be 8 ohms.

Maximum SPL measured at 1 metre on axis shall be 119dB continuous, 125dB peak.

Dimensions (W) 323mm x (H) 493mm x (D) 325mm (12.7ins x 19.4ins x 12.8ins).

Weight 17kg (37lbs).

The loudspeaker system shall be the Martin Audio AQ10.

Century Point, Halifax Road, Cressex Business Park,

High Wycombe, Buckinghamshire HP12 3SL, England.

Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669

E-mail: info@martin-audio.com

5 of 5

AQ10

Compact, full-range system