Rear Panel
5
6
7
8
10
12
16
MODEL: GROOVE 410H
IMPEDANCE: 8 OHMS
POWER: 500 WATTS RMS
SENSITIVITY:95dB 1W/1M
4
3
2
1+1 tip,
INPUT/OUTPUT
+1 and
0
HORN ATTENUATION dB
Designed by Kustom Inc. Cincinnati, Ohio
MADE IN CHINA
Horn Attenuator: | Speaker Input/Output: |
This is a “volume” control for the horn. To disable the horn, turn the knob counter clockwise until the indicator reaches . To set the horn for maximum output, turn the knob clockwise until the indicator reaches 0.
Speaker Input/Output:
These jacks can be used as an input and/or output. The jacks accept a standard ” cable. Note: When using these jacks as an output to another cabinet, refer to the Amplifier Loading Chart (page 4) for important amplifier loading information.
These jacks can be used as an input and/or output. They accept standard Speakon type speaker cables. To connect a cable: Insert and twist one quarter turn clockwise until the release button locks. To remove a cable: Pull back release button on cable connector, twist connector counter clockwise one quarter turn, and pull out connector. Note: When using these jacks as an output to another cabinet, refer to the Amplifier Loading Chart (page 4) for important amplifier loading information.
3