Technical Specification

The ported enclosure is fabricated from curved pressure-laminated panels, each using multiple layers of selected woods and metal to provide high stiffness and damping. Its narrow, tapered shape offers optimum dispersion across a wide listening area.

The cabinet is constructed with extensive bracing. The front incorporates a window for the matrix display and an infrared remote control sensor. The cabinet stands on triangulated adjustable machined foot assemblies with provision for floor spikes or skids.

Meridian DSP Loudspeakers, what’s inside?

Preamp

Crossover

3-way

passiveDAC speaker

systemDAC

DAC

Power Amp

All these separate components are integrated in Meridian DSP loudspeakers

DSP7000

Digital Signal Processing

Loudspeaker System

The DSP7000 uses the same design principles as the award-winning Meridian DSP8000 and is perfect for use in a Meridian Digital Theatre®

Performance: Frequency response in-room within 3dB from 30Hz to over 20kHz. Maximum output >112dB spl @ 1m on music material.

Noise less than 15dB spl.

Overall distortion typically <0.02% at any frequency or level.

Inputs: Two digital inputs to SPDIF standard; 32kHz–96kHz sampling rates at up to 24 bit; MHR support. (A future software update will enable support for 192kHz.)

Construction: Four-way acoustic reflex system. Digital crossovers at 200Hz and 2.6kHz. 2 x 200mm long-throw bass drivers.

1 x 160mm polypropylene mid driver.

1 x 25mm aluminium-dome tweeter, silver wire, short horn-loaded with protective grille.

Black gloss piano-lacquer cabinet, other colours to special order. FIFO memory buffer input for the lowest possible jitter from almost any source.

Analogue gain and filtering using proprietary Meridian Class-A discrete amplification.

Digital and conversion electronics constructed using advanced surface-mount techniques and partitioned 6-layer printed-circuit boards.

Four 24-bit 128 x oversampling D/A converters. Four 100W power amplifiers per speaker.

Dimensions: 1050mm (41.3”) H, 348 (13.7”) W, 458 (18.0”) D. Weight 70kg (154 lb) each.

Controls: Rear-panel controls for Power On/Off.

MSR and RS232 port provide control over bass, treble tilt, listen- ing axis, volume, time-compensated balance and absolute phase.

Front display: Eight-character display with system lights, can be blank.

Meridian Audio reserve the right to amend and improve specifications at any time.