JL Audio 13W7D15 owner manual Input Sensitivity Setting Guide, Vehicle supply voltages

Page 14

Input Sensitivity Setting Guide

What follows is a simple method for accurately setting the input sensitivity (commonly referred to as “gain”) of JL Audio subwoofer amplifiers. You will need the following equipment:

• AC Voltmeter (digital display type)

• A CD with a sine-wave test tone recorded at 0dB reference level in the frequency range to be amplified (40-50 Hz works well).

Do not use attenuated test tones (-10dB, -20dB, etc.).

Step 1: Disconnect the W7(s) from the amplifier

(It is only necessary to disconnect one wire).

Step 2: Turn “Off” all processing on the head unit and amplifier (bass / treble, loudness, EQ, etc.)

Step 3: Switch “Input Voltage” to “Low” and turn the “Input Sensitivity” control on the amplifier all the way down (full counter-clockwise).

Step 4: Verify that you have disconnected the subwoofers from the amplifier. Then, set the head unit’s volume to 3/4 of full volume.

Step 5: Play a test track with a sine-wave (pure tone) between 40-50 Hz.

Step 6: Connect the AC voltmeter to the “Subwoofer Output” of the amplifier.

Step 7: Consult “Appendix A” in your JL Audio amplifier’s Owner’s Manual and find the correct target output voltage for that model and the nominal impedance of your W7 subwoofer setup.

If you are using another brand of amplifier, we recommend that you use an oscilloscope to verify the maximum unclipped output in the vehicle at realistic

vehicle supply voltages.

Step 8: Increase the “Input Sensitivity” control (clockwise) until the listed voltage is delivered. To level-match multiple subwoofer amps, set each one to the listed voltage. If excessive voltage is read with the control at minimum (full counter-clockwise), switch the “Input Voltage” to “High” and re-adjust.

Step 9: Reduce the head unit’s volume and turn it off. Reconnect the subwoofers to the amplifier.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Green minimum Black WARRANTY VOIDAn Introduction W7 Technologies W7 Mounting Guide Your ToolsYou can grasp the inside of the speaker’s mounting flange Shown belowNeed a better grip or are afraid of smashing your fingers Remember, the surround moves out of the way. This tipNominal Impedance Znom Dual 1.5Ω 13W7-D1.5Amplifier Recommendation 1000/1v2 Recommended Port Tuning 30 Hz Driver SpecificationsEnclosure Specifications Front Baffle Thickness 1 in mm12W7-3 500/1v2 or G-MAXRecommended Port Tuning 32 Hz 10W7-3 Amplifier Recommendation 500/1v2 pictured, HD750/1 Or G-MAXRecommended Net Volume 1.5 cu. ft .5 ltrs 8W7-3 Amplifier Recommendation 250/1v2 pictured or G1700Displacement 0.06 cu. ft .7 ltrs Front Baffle Thickness 0.75 in mm Wall Thickness 0.75 in mmInput Sensitivity Setting Guide Vehicle supply voltagesLimited Warranty If you need service on your JL Audio productNorth Commerce Parkway Miramar, Florida 33025 USA

W7, 13W7D15 specifications

The JL Audio 13W7D15 is a high-performance subwoofer that exemplifies the brand's commitment to providing exceptional audio quality and innovation in the realm of car audio systems. Engineered for drivers who demand deep, powerful bass and unmatched clarity, the 13W7D15 embodies the latest technologies and meticulous craftsmanship that JL Audio is renowned for.

One of the standout features of the 13W7D15 is its massive 13.5-inch diameter cone, constructed from a proprietary blend of materials. This cone delivers both rigidity and lightweight qualities, allowing for fast response times while producing lower frequencies. The distinctive design of the cone is complemented by the patented W-Cone technology, which enhances the overall surface area without increasing the size of the enclosure. This innovative approach maximizes the output of the subwoofer while ensuring optimal sound quality.

The 13W7D15 incorporates a high-temperature voice coil, designed to withstand extreme heat generated during high-performance audio playback. This feature not only enhances reliability but also contributes to the overall efficiency of the subwoofer, ensuring that it can handle substantial power without distortion. Additionally, the subwoofer utilizes a dual 3-ohm voice coil configuration, providing flexibility in wiring options and enabling users to customize their sound system according to their preferences.

Advanced cooling technology is another significant aspect of the 13W7D15 design. The subwoofer is equipped with a unique cooling system that includes an intelligently designed vent that directs air through the voice coil, effectively dissipating heat. This feature not only extends the longevity of the subwoofer but also maintains consistent performance even during prolonged periods of heavy use.

In terms of power handling, the 13W7D15 impressively manages up to 1000 watts of RMS power with a peak power handling capacity that goes even higher. This robust power handling ensures that the subwoofer can reproduce the most demanding bass tracks with authority, bringing an immersive auditory experience to the listener.

Constructed with attention to detail, the subwoofer features an advanced mounting system, including a durable rubber surround, ensuring that it can handle the vibrations without compromising sound integrity. The robust cast aluminum frame enhances durability while providing a stable foundation for the driver.

In summary, the JL Audio 13W7D15 is a testament to engineering excellence and high-fidelity sound reproduction. With its cutting-edge technologies, impressive power handling, and meticulous design, it stands out as a top choice for audiophiles who seek to elevate their sound experience in both car audio systems and home theater environments.
Top Page Image Contents