Jawbone SPA-K901 manual Go to your device’s Bluetooth settings

1 . 2 PREPARE YOUR JAMBOX FOR PAIRING

1Hold the ON/OFF SWITCH in the upmost position for about 3 seconds.

2Wait for the LED RING to flash red & white.

3You will hear JAMBOX say that it is ready to pair.

4Release the ON/OFF SWITCH to the middle/on position.

1 2 4

1 . 3 PREPARE YOUR PHONE OR DEVICE

Turn on Bluetooth®.

ON AN IPHONE®, IPOD®, OR IPAD®

Go to SETTINGS > GENERAL > and enable BLUETOOTH

ON A BLACKBERRY®

Go to SETTINGS/OPTIONS > BLUETOOTH and enable BLUETOOTH

OTHER CELL PHONES

Go to JAWBONE .COM/PAIRING or review the instruction manual that came with your phone.

1 . 4 MAKE THE CONNECTION

Go to your device’s Bluetooth® settings.

ADD OR SEARCH FOR DEVICES

When “JAMBOX by Jawbone” appears, select it.

IF ASKED FOR A PASSCODE

Enter “0000”

This is a one-time event per device. To pair your Jawbone JAMBOX to another device, repeat steps 1.2 to 1.4.

1 . 5 OR PLUG & PLAY

No Bluetooth? JAMBOX also connects via 3.5mm stereo input.

3.5mm STEREO

Play audio from any device with a headphone jack or audio output.

8 9