OPERATION
Surround Modes
When using the system in a Dolby* Digital or DTS® home theater system, make sure all
When using the
Some Dolby
MAINTENANCE AND SERVICE
The satellite enclosure may be cleaned using a soft cloth to remove fingerprints or to wipe off dust.
All wiring connections should be inspected and cleaned or remade periodically. The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions, and other factors, but once per year is the minimum.
If a problem occurs, make sure that all connections are properly made and clean. If a problem exists in one loudspeaker, reverse the connection wires to the left and right system. If the problem remains in the same speaker, then the fault is with the loud- speaker. If the problem appears in the opposite speaker, the cause is in another component or cable. In the event that
your
SPECIFICATIONS
SAT-450
Frequency Range: | 150Hz – 20,000Hz (±3dB) |
Recommended |
|
Amplifier Power Range: | 10 – 100 watts |
Sensitivity: | 86dB |
(2.83V @ 1 meter) |
|
Nominal Impedance: | 8Ω |
Crossover Frequency: | 7000Hz, 24dB/octave |
Midrange Driver(s): | |
| magnetically shielded |
1/2," | |
| magnetically shielded |
Dimensions (H x W x D): | 5" x |
| (127mm x 88mm x 88mm) |
Weight: | 1.2 lb (0.5kg) |
Infinity continually strives to update and improve existing products, as well as create new ones.The specifications and construction details in this and related Infinity publications are therefore subject to change without notice.