Wiring the System, Final Adjustments

WIRING THE SYSTEM

IMPORTANT: Make sure all equipment is turned off before making any connections.

For speaker connections, use a minimum #16-gauge speaker wire with polarity coding. The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., +).

NOTE: If desired, consult your local Infinity dealer about speaker wire and connection options.

FIGURE 3 –	Speaker Wire
Interlude series	No Marking = –	Marking = +
speakers feature	No Marking = –	Marking = +
speakers feature
color-coded
terminals.This		Red = +
example shows the	Black = –
most common way	Black = –
most common way
of connecting	❶ Loosen Terminal
speaker wire by	❷ Insert
speaker wire by	Bare End;
directly inserting	Bare End;
directly inserting	Tighten Terminal

into terminals.

To ensure proper polarity, connect each + terminal on the back of the amplifier, receiver or television to the respective + (red) terminal on each speaker, as shown in Figure 3. Similarly, connect the – (black) terminals in the same way. Also, see the owner’s guides that were included with your amplifier or receiver to confirm connection procedures.

FIGURE 4 – Wiring diagram shows polarity connections for one channel of a stereo or home-theater system.

Receiver or		Interlude Center
Amplifier
(rear view)		black -	+ red
+	–

(one channel shown)

IMPORTANT: Do not reverse polarities (i.e., + to – or – to +) when making connections. Doing so will cause poor imaging and diminished bass response.

FINAL ADJUSTMENTS

Check the speakers for playback first by setting the system volume control to a minimum level, and then by applying power to your audio system. Following the directions provided with your receiver/processor, adjust the center-channel volume so that it matches the output of the left and right speakers.

CARE OF YOUR SPEAKER SYSTEM

Each Interlude series cabinet has a wood-vinyl finish that does not require any routine maintenance. When needed, use a soft cloth, dampened with water only, to remove any fingerprints or dust.

Clean the grille by gentle vacuuming.

NOTE: Do not use any cleaning products or polishes on the cabinet or grille.

INTERLUDE IL25c, IL36c

IL25c, IL36c specifications

The Infinity IL36c and IL25c are cutting-edge speaker models designed for audiophiles and casual listeners alike, providing an immersive audio experience with exceptional clarity and precision. These speakers showcase the perfect balance between advanced technology and elegant design, making them an excellent choice for any acoustic setup.

One of the hallmark features of the Infinity IL36c and IL25c is their innovative driver technology. These speakers incorporate high-performance woofers, mid-range drivers, and tweeters that work in tandem to deliver a wide frequency response. The woofers are engineered to produce deep, resonant bass that feels powerful without compromising the overall sound balance. Meanwhile, the mid-range drivers excel in reproducing vocal and instrumental clarity, ensuring that every note and tone is accurately presented. The tweeters are designed to deliver crisp and detailed high frequencies, enhancing the overall soundstage and making each listening experience truly dynamic.

Both models feature advanced crossover technology that ensures optimal sound distribution across the frequency spectrum. This means that the sound is evenly balanced, resulting in an audio experience that remains coherent even at high volumes. The crossovers are fine-tuned to minimize distortion, providing a clean output that is essential for high-fidelity sound reproduction.

The design of the Infinity IL36c and IL25c also deserves mention. They feature an aesthetically pleasing enclosure that not only enhances their visual appeal but also contributes to the acoustics. The cabinets are constructed from dense materials to reduce resonance, while the finishes are sleek and modern, fitting seamlessly into any home or professional setting.

In terms of connectivity, the IL36c and IL25c offer versatility, with options to integrate them into various audio systems easily. They are compatible with a wide range of amplifiers and receivers, allowing users to customize their setups according to personal preferences.

Overall, the Infinity IL36c and IL25c speakers embody the combination of performance, technology, and style. With their advanced driver systems, superior crossover technology, and elegant designs, they are well-suited for anyone looking to elevate their audio experience. Whether used for immersive home theater setups or critical listening in music studios, these speakers deliver outstanding performance that audiophiles and casual listeners alike will appreciate.