Selection of Proper Wire

Mir90isrev.QXD 10/28/02 12:00 PM Page 4

o w n e r s m a n u a l

9 0 i s s e r i e s

response be the same from both left and right channels. It is therefore important that consideration be paid to the left and right reflecting walls. First, they should be symmetrical, equally spaced from the speakers and the listeners. Secondly, they should have the same, or very similar reflective properties. Example: A curtain on one wall and a painted surface on the opposite wall will result in unbalanced reflections, which in turn affect the stereo image. Experiment with toe-in/toe-out positioning of your speakers until best results are achieved.

5.Spiked feet are recommended for stability on carpeted floors.

6.The loudspeakers should be placed 2 to 3 meters (6” to 10”) apart and approximately 1/2 meter from the wall behind the speaker.The distance from loudspeakers to listener should be about 1 to 1.5 times the distance separating the speakers (see figure 1).

We recommend the use of high quality speaker cable. The speaker cable you select will ideally be fitted with high quality connectors with either 5/16” spade lugs or dual banana plugs.

In most installations, ordinary lamp cord (16-18 gauge) has enough resistance to degrade the signal between amplifier and speakers, particularly in lengths over 3 meters (10’). If possible the speaker cables should be the same length for both channels and the shorter they are, the better the sonic performance will be.

*When connecting your speakers to your sound system, turn off your amplifier to avoid damage which could result from shorting of the speaker leads.

Amplifier Requirements

Mirage loudspeakers have been designed to be driven to high listening levels with moderate power, while at the same time being capable of handling the power output of large amplifiers.

NOTE: Mirage 90is Series speakers are 8 ohms nominal and will function well with quality amplifiers.